克莱默KRAMER--LASSEN 3216HDS

The Lassen 32 series are high performance routing switchers for SDI (SMPTE 259) and HD-SDI (SMPTE 292) video signals. These units come in a compact 3U (5.25”) frame and can be ordered with or without analog or digital audio. They can route any or all inputs to any or all outputs. HD-SDI models can input SDI and HD-SDI simultaneously, but there is no conversion between formats. 

LASSEN XL ANALOG (COMPOSITE) VIDEO FEATURES -
High Bandwidth - 300MHz (- 3dB) fully loaded.
Very Low Crosstalk - 80dB @ 1MHz, - 47dB @100MHz.
Qwik Adjust Knob™ Rotary Control interface - This user intuitive knob along with the 80 character LCD display provides quick and convenient setup, adjustment and signal switching.
Video Mute Capability
Genlock Input - Looping internal sync input for vertical interval switching.
Output Disconnect Feature

LASSEN SDI VIDEO FEATURES -
Maximum Data Rates - 360Mbits/sec.
Standards - SMPTE 310, SMPTE 259, DVB-ASI.
Jitter - < 0.2UI.

LASSEN HD VIDEO FEATURES -
Backwards compatible with SDI Signals
Maximum Data Rates - 1.485Gbits/sec.
Standards - SMPTE 310, SMPTE 259, SMPTE 292, DVB-ASI.
Jitter - < 0.2UI.

ANALOG AUDIO FEATURES. -
Audio Type - Balanced or un-balanced on terminal blocks.
Input (Level) Adjustment Capability (-10dB to +15dB) - Each input via RS-232, front panel, and G.R.I.P software.
Output (Volume) Adjustment Capability (Mute, -59.5dB to +15dB) - Each input via RS-232, front panel, and G.R.I.P software.
No Zipper Effect - Lassen routing switchers employ zero crossover chip technology which eliminates the annoying “zipper sound effect” associated with digital volume controls.
Audio Mute Capability.
Crosstalk - 80dB @ 1kHz & 70dB @ 20kHz.
S/N (20 - 20kHz) - 90dB.

DIGITAL AUDIO FEATURES -
Standards - Balanced AES/EBU.
Jitter - +/- 20ns.

OTHER FEATURES -
Firmware Updates - Downloadable.
Control - Local front panel control with 80 character LCD readout.
RS-232/422 plus RS-485 for optional control panels.
IP (Ethernet) control.
G.R.I.P: Windows® - based routing switcher setup/diagnostic software.
Redundant Power Supplies - Optional on 32x16 & 32x32 models.
Approvals - UL & CE.
Control Panels (Optional) - Programmable, Single Bus and XY.

› 规格 ANALOG VIDEO Input impedance 75Ω nominal
Input connector type BNC
Video input level 300mV to 2.5V P-P
Video input level 300MHz (- 3dB)
Crosstalk 80dB @ 1MHz
- 47dB @ 100MHz
1 input to many outputs All electrical specifications remain the same
Video gain Unity (adjustable per channel +/- 1.5dB)
ANALOG AUDIO Max. input amplitude + 24dBu
Input impedance > 20kΩ
Output impedance < 50Ω
Voltage gain (Adjustment range if any) Unity +/- 0.75dB max (+ - 0.25 typical)
Input adjust range: -8dB to + 20dB
Output adjustment range: + 15dB to fully off (Mute)
Frequency response 20Hz to 20kHz +/- 0.5dB(typical - 3dB @ 120kHz) (unity gain)
S/N ratio (20 to 20kHz) 96dB (20-20kHz unweighted - unity gain)
Crosstalk (all inputs hostile) < - 80dB @ 1kHz (unity gain)
< - 60dB @ 10kHz (unity gain)
IM & THD (20 to 20kHz) THD: < 0.025% (20Hz - 20kHz @ + 4dBu) (unity gain)
IM: < 0.025 SMPTE-DIN @ + 4dBu (unity gain)
< 0.01% CCIF @ + 16dBu (unity gain)
Max output amplitude + 24dBu balanced
+ 18dBu unbalanced
Audio connectors 5 pin per stereo input or output
Every IO can be connected to be either balanced or unbalanced
SDI VIDEO Data rates up to 360 Mbps/sec
Data types SMTE 310, SMPTE 259, DVB-ASI
Input cable equalization range 0 - 200 meters
Input return loss > 15dB
Output level 750 - 850mVp-p
Output jitter < 0.2 UI
Output return loss > 15dB
Signal connectors BNC
DIGITAL AUDIO Data rates AES3: Balanced; AES3ID: Unbalanced
Connector AES3: XLR/phoenix ; AES3ID: BNC
Input/Output Impedance AES3: 110Ω; AES3ID: 75Ω
Output level AES3: 2-7Vp-p; AES3ID: 10Vp-p
Cable AES3: STP; AES3ID: Coax
Max. distance AES3: 100m; AES3ID: 1000m
Min. input AES3: 2Vp-p; AES3ID: 32Vp-p
Equalization AES3: Optional; AES3ID: Optional
Jitter AES3: +/- 20ns; AES3ID: +/- 20ns
Bandwidth AES3: 1MHz - 6MHz; AES3ID: 1MHz - 6MHz
HD-SDI VIDEO Data rates up to 1.485 Gbits/sec
Data types SMTE 310, SMPTE 259, SMPTE 292, DVB-ASI
Input cable equalization range 0 - 100 meters for SMPTE 292
0 - 200 meters for all other stds.
Input return loss > 15dB up to 1.5GHz
Output level 750 - 850mVp-p
Output jitter < 0.2 UI
Output return loss > 15dBup to 1.5GHz
Signal connectors BNC