我的位置：
WP-211DS 是一款2-输入自动切换器,用于XGA 和立体声音频信号. 自动切换到备用输入上 ,或由干接点控制. 双视频输出 RGBHV 和双绞线(Cat 5) 接线端子接头.
High Bandwidth - 300MHz (-3db)
HDTV Compatible
Automatic Standby Switching - It will switch from secondary input to primary input when a signal is detected
Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source. All the system units must have the Power Connect system to use this feature.
Front Panel Connections - Dual 15-pin HD and dual 3.5mm inputs
Rear Panel Connections - Terminal block outputs for stereo audio, contact closure control, and RGBHV and twisted pair for computer graphics video.
Looping Input - Input 1
Control - Automatic or contact closure switching and output disconnect with LED status indicator
ID Bit Control
System Range - CAT 5 up to 100 meters (320’)
Twisted Pair Cable - UTP (unshielded twisted pair) such as CAT 5.
Wall Plate - 3 gang
典型应用
计算机信号的自动切换应用 (up to UXGA and higher).
