我的位置：
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| Avid Audio | 010-57306096 (音频) 、010-57306095 (视频) | 面议 |
Digidesign RMS |
RM1 |
RM2 |
| Specifications | ||
| Frequency Response |
50 Hz - 25 kHz |
40 Hz - 25 kHz |
| Peak SPL at 1 meter |
111 dB |
113 dB |
| Effective Line Length |
4.9 feet (1.5 meters) |
|
| Drive Unit: Low Frequency |
5.5-inch (140 mm) doped cone with cast alloy chassis |
6.7-inch (170 mm) doped cone with cast alloy chassis |
| Drive Unit: High Frequency |
1-inch (27 mm) fabric soft dome with ferrofluid cooling |
|
| Crossover Frequency |
3 kHz |
|
| HF Adjustment | -4 dB to +3 dB in 0.5 dB steps; corner frequency 1 kHz | |
| LF Adjustment |
-4 dB to +3 dB in 0.5 dB steps; corner frequency 750 Hz |
4 dB to +3 dB in 0.5 dB steps; corner frequency 500 Hz |
| Input Connectors | ||
| Analog |
XLR Female—PIN 1 GND, PIN 2 +, PIN 3 - |
|
| Digital (AES/EBU) |
XLR Female—PIN 1 GND, PIN 2 +, PIN 3 - |
|
| Input Impedance |
22k Ohm |
|
| Sensitivity | ||
| Input Level for Full-Scale Output |
Adjustable from +4 dBu to +19 dBu |
|
| Gain Trim |
Nominal gain setting from 0 dB to -15 dB in 1 dB steps |
|
| Analog to Digital Specifications | ||
| Maximum Input Level |
20.9 dBu |
|
| Signal to Noise Ratio |
111 dB A-weighted |
|
| THN + Noise |
-95 dB |
|
| Conversion Rate |
24-bit / 96 kHz |
|
| Digital to Analog Specifications | ||
| Output Voltage |
6.37 VRMS |
|
| Signal to Noise Ratio |
110 dB A-weighted |
|
| THD + Noise |
-95 dB |
|
| Power Amplifier | ||
| Output Power |
LF: 80 Watts, HF: 50 Watts |
LF: 100 Watts, HF: 50 Watts |
| THD + Noise |
0.05% |
|
| Signal to Noise Ratio |
125 dB |
|
| Frequency Response |
DC - 50 kHz |
|
| Efficiency |
> 92% at full power |
|
| Size / Weight / Finish | ||
| Height |
11.42 inches (290 mm) |
H: 15.75 inches (400 mm) |
| Width |
6.1 inches (155 mm) |
7.64 inches (194 mm) |
| Depth |
11.81 inches (300 mm) |
14.57 inches (370 mm) |
| Weight |
14 lbs (6.4 kg) per unit |
20 lbs (9 kg) per unit |
| Finish |
Dark gray texture—RAL 9004 |
|
