爱思创Extron电子-Communication Cable - Plenum-MLC IR/RS-232

　　Extron MLC IR/RS-232 cable is used to send IR and RS-232 commands to a projector or display from an MediaLink ^® or IPLink ^® control system. One end of the MLCIR/RS-232 interconnect cable features a 9-pin D Female for RS-232 control and a 20AWG pigtail for use with an IREmitter. The other end has unterminated dual 20AWG shielded twisted pairs with two drain wires for simple termination to captive screw connectors. This time-saving and cost-effective cable assembly is available in a pre-cut length of 50' (15.2m).

　　By using Extron integration-ready cables, professional AV system integrators save both the time and expense of a skilled in-field technician normally needed to solder or terminate cables. These integration-friendly, plenum-rated cables are manufactured using Extron quality bulk cables and fully machined or durable molded connectors.

　　特性

　　Used to send IR and serial RS‑232 commands to a projector or display from a MediaLink ^® or IPLink ^® control system

　　Unterminated, dual 20 AWG shielded twisted pairs with drain wires for captive screw connectors to a 9-pinD female for RS‑232 projector or display control and a 20AWG pigtail for use with an IREmitter

　　NEC CMP rated, plenum cable

　　注: Part numbers 26-621-06, 26-621-15, and 26-621-35 are retired.

　　Extron MLC IR/RS-232 cable is used to send IR and RS-232 commands to a projector or display from an MediaLink ^® or IPLink ^® control system. One end of the MLCIR/RS-232 interconnect cable features a 9-pin D Female for RS-232 control and a 20AWG pigtail for use with an IREmitter. The other end has unterminated dual 20AWG shielded twisted pairs with two drain wires for simple termination to captive screw connectors. This time-saving and cost-effective cable assembly is available in a pre-cut length of 50' (15.2m).

　　示意图

　　面板图