数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-用于地插盒的 2 路输入 4K/60 DTP2 发送器-DTP2 T 202 FB

厂家报价:面议 产品状态:(在产)

用于地插盒的 2 路输入 4K/60 DTP2 发送器 DTP2 T 202 FB

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
DTP2 T 202 FB

Specification
Frame rate 1 24, 25, 30, 50, or 60 fps
Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0
Color bit depth 1 8, 10, or 12 bits per color
Signal type HDMI 2.0b;HDCP 2.2
Max. video data rate 18 Gbps (6 Gbps per color)
NOTE 1 Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
Video
HDMI input
Maximum data rate 18Gbps (6 Gbps per color)
Maximum pixel clock 600MHz
Resolution range Up to 2560x1600* @ 60 Hz or
UHD (3840x2160) @ 60 Hz
*with 4:4:4 chroma subsampling
Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit
Formats RGB and YUV digital video
Standards DVI 1.0; HDMI 1.4, 2.0b; HDCP 1.4, 2.2;CEA-861E
DisplayPort input
Maximum data rate 17.28 Gbps (5.4 Gbps per channel)
Maximum pixel clock 600MHz
Resolution range Up to UHD (3840x2160) @ 60 Hz
with 4:4:4 chroma subsampling
Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit
Formats RGB and YUV digital video
Standard DisplayPort 1.2
Video input — HDMI
Number/signal type 1 HDMI input (or single-link DVI-D with the appropriate DVI-HDMI adapters)
Connectors 1 female HDMI type A
Video input — DisplayPort
Number/signal type 1 DisplayPort
Connectors 1 female 20-pin DisplayPort
Input cable length Up to 6 feet
Interconnection between transmitter and receiver
Connector 1 female RJ-45 per unit
Termination standard TIA/EIA T568B
Transmission distance Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Audio
Gain Unbalanced output: 0 dB; balanced output +6 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output
S/N >90 dB, at maximum output (15 dBu), unbalanced (unweighted)
Stereo channel separation >80 dB @ 1 kHz to 20 kHz
Analog audio input
Number/signal type 1analog stereo, unbalanced
2digital audio, embedded on the HDMI and DP
Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
Connectors 1female 3.5 mm mini stereo jack, 2 channel: tip (L), ring (R), sleeve (ground)
Impedance >10k ohms, DC coupled
Nominal level -10 dBV (316 mVrms)
Maximum level +7dBV (unbalanced)
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port 1 RS-232, 3.5 mm captive screw connector, 3-pole, rear panel
Pin configuration Pin 1 = Tx, pin 2 = Rx, pin 3 = GND
Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
USB control port 1 female mini USB type B, front panel
USB standards USB 2.0 high speed
Over DTP/HDBT RS-232/IR pass through RS-232: Pin 1 = Tx, Pin 2 = Rx, Pin 3 = GND
IR: Pin 4 = Tx, Pin 5 = Rx
Program control Extron Simple Instruction Set (SIS™)
General
Power supply External
Input: 100 to 240 VAC, 50-60 Hz
Output:12 VDC,1.5 A,18 watts
Power consumption
Device 16.8watts,12 VDC
Device and power supply TBD watts, 100-240 VAC, 50-60 Hz
NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of thetwisted paircable.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vented
Thermal dissipation
Device TBD BTU/hr
Device and power supply TBD BTU/hr
Mounting
Floor box mount Ackermann GB3/OBO Betterman floor box, MK Electric CableLink Plus Single Pan floor box, MK Electric CableLink Plus Modular floor box, ElectraPlan floor box, and PUK floor box mountable
NOTE See the DTP2 T 202 FB User Guide for mounting considerations.
Enclosure type Metal
Enclosure dimensions 2.3" H x 2.8" W x 5.2" D*
(5.9 cm H x 7.2 cm W x 13.2 cm D)
(Dimensions exclude connectors)
*Depth is 6.1" (15.5 cm) including mounting tabs
Product weight 1.13 lbs (515 g)
Regulatory compliance CE, C-tick, C-UL, UL,FCC Class A, ICES, KCC, VCCI
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4299-D1)
    null