数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-集成 DTP2 发送器的 3 路输入 4K/60 切换器-DTP2 T 203

厂家报价:面议 产品状态:(在产)

集成 DTP2 发送器的 3 路输入 4K/60 切换器 DTP2 T 203

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
DTP2 T 203

specification
Frame rate 1 24, 25, 30, 50, or 60 fps
Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0
Color bit depth 1 8, 10, or 12bits per color
Signal type 1 HDMI2.0b,HDCP 2.2
Max. video data rate 1 18 Gbps (6 Gbps per color)
NOTE 1 Subject to the maximum data rate limit. Use our calculator ( www.extron.com/4Kdatarate ) to determine video parameters supported by this data rate.
Video
HDMI input
Maximum data rate 18Gbps (6 Gbps per color)
Maximum pixel clock 600 MHz
Resolution range Up to 2560x1600@ 60 Hz or
UHD (3840x2160) @ 60 Hz,
with 4:4:4 chroma subsampling
Color bit depth 8, 10, 12 bits — subject to the maximum data rate limit
Formats RGB and YUV digital video
Standards DVI 1.0; HDMI 1.4, 2.0b; HDCP 1.4, 2.2; CEA-861E
DisplayPort input
Maximum data rate 17.28 Gbps (4.32 Gbps per channel)
Maximum pixel clock 600 MHz
Resolution range Up to 3840x2160 @ 60Hz or 3840x2160 @ 60 Hz with 4:4:4 chroma subsampling
Color bit depth 8, 10, 12 bits — subject to the maximum data rate limit
Formats RGB and YUV digital video
Standards DisplayPort 1.2
Video input — HDMI
Number/signal type 2 single-link HDMI (or DVI-D)
Connectors 2 female HDMI type A
Video input — DisplayPort
Number/signal type 1 DisplayPort
Connectors 1 female 20-pin DisplayPort
Input cable length Up to 6 feet
Interconnection between transmitter and receiver
Connectors 1 female RJ-45 jack
Termination standards TIA/EIA T568B
Signal transmission distance Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth STP cable
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Audio
Gain Unbalanced output: 0 dB; balanced output +6 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.03% @20 Hz to 20kHz at maximum output
S/N >90 dB at maximum output (15 dBu), balanced (unweighted)
Stereo channel separation >80 dB @ 1 kHz to 20 kHz
Analog audio input
Number/signal type 1 stereo, unbalanced
3 digital embedded audio on HDMI and DP
NOTE Analog audio can be configured for embedding onto the digital video signal at the Transmitter. Embedded digital audio can be (configured) de-embedded from the digital video signal at the Receiver end.
Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
Connectors (1) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (GND)
Impedance >10k ohms, DC coupled
Nominal level -10 dBV (316 mVrms)
Maximum level +7 dBV, unbalanced
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port 1 RS-232, 3.5 mm captive screw connector, 3 pole, rear panel
Pin configuration Pin 1 = Tx, Pin 2 = Rx, Pin 3 = GND
Baud rate and protocol 9600 baud rate, 8 data bits, 1 stop bit, no parity
USB control port 1 female mini USB, type B, front panel
USB standards USB 2.0, high speed
Ethernet data rate 10/100Base-T, half/full duplex, with autodetect
Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet, SMTP
Program control Extron's Simple Instruction Set (SIS™), Extron Product Configuration Software (PCS), Microsoft Internet Explorer, Telnet
Contact closure (1) 3.5 mm captive screw connector, 4 pole
Pin configuration Pin 1 = input 1 contact, Pin 2 = input 2 contact, Pin 3 = input 3 contact, Pin 4 = GND
Tally output (1) 3.5 mm captive screw connector, 4 pole
Pin configuration Pin 1 = input 1 tally, Pin 2 = input 2 tally, Pin 3 = input 3 tally, Pin 4 = +5 V
Over DTP/HDBT RS-232/IR pass through Pin 1 = RS-232 Tx, Pin 2 = RS-232 Rx, Pin 3 = GND, Pin 4 = IR Tx, Pin 5 = IR Rx
General
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output:12 VDC,2.0 A, 24 watts
Power consumption
Device 18.6 watts
Device and power supply 20.5 watts
NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of thetwisted paircable.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vents on top side and sides
Thermal dissipation
Device 62.5 BTU/hr
Device and power supply 68.8 BTU/hr
Enclosure type Metal
Enclosure dimensions 1.0" H x 8.75" W x 6.0" D (1" high, half rack wide)
2.5 cm H x 22.2 cm W x 15.2 cm D (depth excludes connectors)
Product weight 1.1 lbs (0.5 kg)
Regulatory compliance CE**, c-UL, UL, C-tick, FCC Class A**, ICES, VCCI, KCC
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply
Product warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4322-D1)
    null