数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-用于 DisplayPort 和 HDMI 信号并带音频加嵌功能的 2 路输入 DTP 发送器 - Decor-DTP T DWP 4K 232 D

厂家报价:面议 产品状态:(在产)

用于 DisplayPort 和 HDMI 信号并带音频加嵌功能的 2 路输入 DTP 发送器 - Decor DTP T DWP 4K 232 D

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
DTP T DWP 4K 232 D

specification
Frame rate 1 24, 25, 30, 50 2 , or 60 2 fps
Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0 2
Color bit depth 1 8 bits per color
Signal type 1 HDMI 1.4 , DisplayPort 1.1a, HDCP 1.4
Max. video data rate 1
HDMI 10.2 Gbps (3.4 Gbps per color)
DisplayPort 10.8 Gbps (2.7 Gbps per lane)
NOTE 1 Subject to the maximum data rate limit. Use our calculator ( www.extron.com/4Kdatarate ) to determine video parameters supported by this data rate. 2 Applicable to HDMI signals only.
Video
HDMI input
Maximum data rate 10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock 300 MHz
Resolution range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz,
UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(*Reduced blanking)
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI
DisplayPort input
Maximum data rate 10.8 Gbps (2.7 Gbps per lane)
Maximum pixel clock 300 MHz
Resolution range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz
(*Reduced blanking)
Formats RGB and YCbCr digital video
Standards DisplayPort 1.1a
Video input
NOTE *AppropriateHDMI to DVI-D cables or adapters are required for DVI signal input/output.
Number/signal type
HDMI input 1 single link HDMI (or single link DVI-D*) input
DisplayPort input 1 DisplayPort
Connectors
HDMI input 1 female HDMI, type A
DisplayPort input 1 female DisplayPort
Interconnection between transmitter and receiver
Signal type 1 DTP 230 output
Connectors 1 female RJ-45 jack
Termination standards TIA/EIA T568B
DTP signal
Signal transmission distance
1080p @ 60 Hz Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
2560x1600 @ 60 Hz Up to 130' (40 m) using STP cable or XTP DTP 24 cable
4K/UHD @ 30 and 60 Hz Up to 130' (40 m) using STP cable or XTP DTP 24 cable
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth STP cable
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
NOTE Output mode signaling:
DTP : HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT : HDMI with embedded audio plus RS-232 and IR
Audio
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.03% @ 1 kHz at nominal level
S/N >90 dB at maximum input (unweighted)
Stereo channel separation >80 dB @ 1 kHz
Audio input
Number/signal type 2 stereo, unbalanced
Connectors (2) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (Gnd)
Impedance >10k ohms, DC coupled
Nominal level -10 dBV (316 mVrms)
Maximum level +6 dBu, unbalanced
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Control/remote — switcher
Serial control port RS-232 via 1 rear panel 3.5 mm, 3-pole captive screw connector
Pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
Baud rate and protocol 9600 baud rate, 8 data bits, 1 stop bit, no parity
USB control port 1 front panel female mini USB B
USB standards USB 2.0, high speed
Program control Extron Simple Instruction Set (SIS™)
Control/remote — external device (RS-232/IR over TP)
NOTE Protocol is mirrored between the connected DTP 230 Rx or DTP 330 Rx endpoints and the "Over TP" ports on the
DTP TDWP 4K series. Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP 230 Rx or DTP 330 Rx endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints. There is no RS-232 or IR insertion from any
DTP TDWP 4Kcontrol port to the "Over TP" ports.
Serial control pass-through port Bidirectional RS-232
Connector (1) 3.5 mm captive screw connector, 5-pole (shared with IR port)
Baud rate and protocol 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
IR pass-through control port 1 bidirectional TTL level (0 to 5V) modulated infrared control from 30 kHz up to 60 kHz
(shared with RS-232 port)
IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC,1.5 A, 18 watts
Power consumption
Device 5.6 watts
Device and power supply 7.8 watts
NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of thetwisted paircable.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation
Device 19.0 BTU/hr
Device and power supply 26.6 BTU/hr
Enclosure type Metal
Enclosure dimensions
Faceplate Two 2.6" H* x 1.3" W x 0.2" D
(6.6 cm H x 3.3 cm W x 0.6 cm D)
Fits the opening in a 2 gang decorator wallplate.
Device Two 2.7" H x 3.5" W x 1.9" D
(6.9 cm H x 8.9 cm W x 4.8 cm D)
Product weight 0.4 lbs (0.2 kg)
Regulatory compliance CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE
NOTE **CE and FCC testing is conducted with STP cable.
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
NOTE Shipping dimensions and weights are available at www.extron.com .
(4372-090518-D6)
    null