我的位置：
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| DTP2 211 Tx/Rx | |||
 Specification |
|||
|---|---|---|---|
 |
|||
| Frame rate 1 | 24, 25, 30, 50, or 60 fps | ||
| Chroma sampling 1 | 4:4:4, 4:2:2, or 4:2:0 | ||
| Color bit depth 1 | 8, 10, or 12 bits per color | ||
| Signal type | HDMI 1.4, 2.0b;HDCP 1.4, 2.2 | ||
| Max. video data rate | 18 Gbps (6 Gbps per color) | ||
|
|||
|
|||
| Video | |||
| Maximum data rate | 18 Gbps (6 Gbps per color) | ||
| Maximum pixel clock | 600 MHz | ||
| Resolution range | 2560x1600 @ 60 Hz or 1080p @ 60 Hz, 12-bit color, 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz |
||
| Color bit depth | 8, 10, or 12 bits — subject to the maximum data rate limit | ||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0; HDMI 1.4, 2.0b; HDCP 1.4, 2.2, CEA-861E | ||
| Video input — transmitter | |||
| Number/signal type | 1 single link HDMI (or DVI-D*) | ||
| Connectors | 1 female HDMI type A | ||
|
|||
| Interconnection between transmitter and receiver | |||
| Connectors | 1 female RJ-45 per unit | ||
| Termination standard | TIA/EIA T568B | ||
| Signal transmission distance | Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
| Video output — receiver | |||
| Number/signal type | 1 single link HDMI (or DVI-D*) | ||
| Connectors | 1 female HDMI type A | ||
| Audio | |||
| Gain | Unbalanced output:0 dBu; balanced output +6 dBu | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.03% @ 20 Hz to 20 kHz at maximum output | ||
| S/N | >90 dB, at maximum output (15 dBu), balanced (unweighted) | ||
| Stereo channel separation | >80 dB @ 1 kHz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 PC level stereo, unbalanced 1 Digital Embedded Audio on HDMI |
||
|
|||
| Connectors | (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) (1) Female HDMI |
||
| Impedance | >10k ohms, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +7 dBV (unbalanced) | ||
|
|||
| Audio output | |||
| Number/signal type | 1 stereo (2 channel), balanced/unbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (600 ohm) | >+11 dBu, balanced | ||
| Communication — external device (pass-through, unidirectional or bidirectional) | |||
| Serial control port input/output | |||
| Transmitter | RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port) | ||
| Receiver | 1 set of proprietary signals on a female RJ-45 jack | ||
| Serial control port output/input | |||
| Transmitter | 1 set of proprietary signals on a female RJ-45 jack | ||
| Receiver | RS-232 via a 3.5 mm, 3 pole captive screw connector | ||
| Baud rate and protocol | 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity | ||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
| IR control port | (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared controlfrom 30 kHz up to 60 kHz |
||
| IR control pin configuration | 3 = Gnd, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | External (included with Tx) Input: 100-240 VAC, 50-60 Hz Output: 12 VDC,1.5 A,18 Watts |
||
| Power consumption | |||
| Transmitter | |||
| Device | 13.1 watts | ||
| Device and power supply | 15.6 watts | ||
| Receiver | |||
| Device | 12.8 watts | ||
| Device and power supply | 15.3 watts | ||
|
|||
| Remote power capability | Supports one endpoint (DTP2) | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Thermal dissipation | |||
| Transmitter | |||
| Device | 43.7 BTU/HR | ||
| Device and power supply | 52.1 BTU/HR | ||
| Receiver | |||
| Device | 42.7 BTU/HR | ||
| Device and power supply | 51.3 BTU/HR | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U high rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| Transmitter | 1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x15.2 cm D) (Depth excludes connectors.) |
||
| Receiver | 1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | |||
| Transmitter | 0.562 lb (.255 kg) | ||
| Receiver | 0.529 lb (.240 kg) | ||
| Regulatory compliance | CE, C-Tick, FCC Class A, ICES, VCCI, KCC, c-UL, UL UL rated for use in plenum airspaces: meets UL for heat and smoke release, excluding the power supply. |
||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4700-D6) | |||
