我的位置：
爱思创Extron电子-集成 DTP2 发送器和 HDMI 输出的 2 路输入 4K/60 HDMI 切换器-DTP2 T 212
厂家报价：面议
产品状态：(在产)
集成 DTP2 发送器和 HDMI 输出的 2 路输入 4K/60 HDMI 切换器 DTP2 T 212
产品品牌：
爱思创EXTRON
产品类别：
产品中心
地址：中国上海市松江区茸华路 686 号
电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| DTP2 T 212 | |||
 specification |
|||
|---|---|---|---|
 |
|||
| Frame rate 1 | 24, 25, 30, 50, or 60 fps | ||
| Chroma sampling 1 | 4:4:4, 4:2:2, or 4:2:0 | ||
| Color bit depth 1 | 8, 10, or 12 bits per color | ||
| Signal type | HDMI 2.0b; HDCP 2.2/1.x | ||
| Max. video data rate | 18 Gbps (6 Gbps per color) | ||
|
|||
| Video | |||
| HDMI input | |||
| Maximum data rate | 18 Gbps (6 Gbps per color) | ||
| Maximum pixel clock | 600 MHz | ||
| Resolution range | Up to 2560x1600*@ 60 Hz or UHD (3840x2160) @ 60 Hz, (* 4:4:4 chroma subsampling) |
||
| HDMI cable input Max EQ distance | 25 feet (7 meters) | ||
| Formats | RGB and YCbCr digital video | ||
| Digital sampling | 8, 10, or 12 bits per channel | ||
| Standards | DVI 1.0, HDMI 2.0b, HDCP 2.2/1.x, CEA-861E | ||
| Video input | |||
| Number/signal type | 2 single link HDMI (or DVI-D*) | ||
| Connectors | 2 female HDMI type A | ||
|
|||
| Video output | |||
| Connectors | 1 local HDMI output, 1 female RJ-45 output | ||
| Termination standard | TIA/EIA T568B | ||
| Transmission distance | Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.03% @ 20 Hz to 20 kHz at maximum output | ||
| S/N | >90 dB, at maximum output (15 dBu), balanced (unweighted) | ||
| Stereo channel separation | >80 dB @ 1 kHz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 PC level stereo, unbalanced 2 Digital Embedded Audio on HDMI |
||
|
|||
| Connectors | (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) (2) Female HDMI |
||
| Impedance | >10k ohms, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +7 dBV (unbalanced) | ||
|
|||
| Communications — switcher | |||
| Serial control port | 1 RS-232, 3.5 mm,3-polecaptive screw connector, rear panel | ||
| Pin configuration | Pin 1 = Tx, Pin 2 = Rx, Pin 3 = GND | ||
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Pin configuration | Pins1 and2 of captive screw connector shorted together enable auto-input switching. | ||
| USB control port | 1 female mini USB, type B, front panel | ||
| USB standards | USB 2.0, high speed | ||
| Contact closure/tally output | (1) 3.5 captive screw connector, 3-pole (1) 3.5 captive screw connector, 4-pole |
||
| Pin configuration | Contact Closure - Pin 1 =Input 1 contact, Pin 1 = Input 2 contact, Pin 2 = GND (for both captive screw) |
||
| Pin configuration | Tally -Pin 3 = Input 1 tally ground, Pin 3 = Input 2 tally ground, Pin 4 = +5V (on Input 2 captive screw) |
||
| Program control | Extron Simple Instruction Set™ (SIS™) | ||
| Communications — external device (RS-232/IR over TP) | |||
| Quantity/type | (1) RS-232 and IR via (1) 3.5 mm 5-pole captive screw connector | ||
| Serial control pass-through ports | (1) Bidirectional RS-232 | ||
| Output/DTP Rx | (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with IR port) | ||
| Baud rate and protocol | 300 to 115200 baud 8 or 7 data bits 1 or 2 stop bits No parity (default), even or odd parity |
||
| Serial control pin configurations | Pin 1 = Tx, Pin 2 = Rx, Pin 3 = GND | ||
| IR control pass-through ports | (1) bidirectional TTL level (0 to 5V) modulated infrared control from 30 KHz to 60 kHz | ||
| Output/DTP Rx | (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with RS-232 port) | ||
| IR control pin configuration | Pin 3 = GND, Pin 4 = IR Tx, Pin 5 = IR Rx | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC,1.5 A,18 Watts |
||
| Power consumption | |||
| Device | TBD watts, 12 VDC | ||
| Device and power supply | TBD watts, 12 VDC | ||
| Remote power capability | Supports one endpoint (DTP2 Rx) | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on top and sides | ||
| Thermal dissipation | |||
| Device | TBD BTU/hr | ||
| Device and power supply | TBD BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with optional rack shelf Back of the rack mountable with optional back-of-the-rack mounting kit |
||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.00" H x 8.75" W x 6.0" D (1 inchhigh, half rack wide) (2.54 cm H x 22.2 cm W x15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | TBD lb (TBD kg) | ||
| Regulatory compliance | CE, c-UL, UL, C-Tick, FCC Class A, ICES, RoHs, WEEE, VCCI | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4623-D5) | |||
