数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-用于地插盒并带音频加嵌功能的 2 路输入 DTP 发送器-DTP T FB 232

厂家报价:面议 产品状态:(在产)

用于地插盒并带音频加嵌功能的 2 路输入 DTP 发送器 DTP T FB 232

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
DTP T FB 232
Video
VGA
Gain Unity
Bandwidth 170 MHz (-3 dB)
Crosstalk -50 dB @ 10 MHz, -30 dB @ 100 MHz
Switching speed <5 ms. (max)
HDMI
Maximum data rate 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock 165MHz
Resolution range Up to 1920x1200 or 1080p @ 60 Hz; 2k
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI, HDCP 1.1, CEA-861E
Video input — HDMI
Number/signal type 1 HDMI input (or single-link DVI-D with the appropriate DVI-HDMI adapters)
Connectors 1 female HDMI type A
Video input — VGA
Number/signal type 1 VGA-QXGA; RGBHV
Connectors 1 female 15-pin HD
Nominal level 0.7 Vp-p for RGB
Min./max. level Analog, 0.3 V to 1.5 Vp-p with no offset
Impedance 75 ohms
Horizontal frequency 15 kHz to 145 kHz
Vertical frequency 30 Hz to 170 Hz
Return loss <-40 dB @ 5 MHz
NOTE The VGA input is digitized and output as DTP. The VGA signal is notscaled.
Sync — VGA
Input type RGBHV
Input level 1.9 V to 5.0 Vp-p
S/N >90 dB at maximum input (unweighted)
Max. input voltage 5.0 Vp-p
Interconnection between transmitter and receiver
Number/signal type 1 DTP 230 output
Connector 1 female RJ-45
Termination standard TIA/EIA T568B
Transmission distance Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 STP cable
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
NOTE Input and output mode signaling:
DTP : HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT : HDMI with embedded audio plus RS-232 and IR
Audio
Gain Unbalanced output: 0 dB; balanced output +6 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.01% @ 1 kHz at nominal level
S/N >90 dB, at maximum input (unweighted)
Crosstalk <-45 dB @ 20 kHz, or -72 dB @ 1 kHz or below
Stereo channel separation >80 dB @ 1 kHz to 20 kHz
Audio input
Number/signal type 1 analog stereo, unbalanced or
1 digital audio, embedded in the HDMI
Connectors 1 female 3.5 mm mini stereo jack
1female HDMI Type A (shared with video input)
Source formats
HDMI LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
Analog Analog stereo audio
Impedance 10k ohms, DC coupled
Nominal level -10 dBV
Maximum level +6dBV, unbalanced
CMRR >60 dB typ @ 1 kHz
Input gain adjustment -18 dB to +24 dB, 1 dB steps, adjustable per input
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV≈ 2 dBu
Audio output
Number/signal type 1 analog audio over DTP signal, or
1 embedded digital audio over DTP signal
Connectors 1 RJ-45 jack
Communications — switcher
Serial control port RS-232 via (1) 3.5 mm, 3 pole captive screw connector
Serial control pin configuration Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd
Baud rate and protocol (RS-232) 9600 baud, 8 data bits, 1 stop bit, no parity
USB control port 1 female mini USB, type B
USB standards USB 2.0, high speed
Program control Extron Simple Instruction Set (SIS TM )
Communications — RS-232/IR over TP
NOTE Protocol is mirrored between the connected DTP 230 Rx and the Over TP output port. Signals from a control device pass intothe Over TP port, are embedded with the DTP signal, and sent to the DTP 230 Rx endpoint for control of remote sink and source devices. The Over TP port is a pass-through connection to the DTP endpoint. There is no RS-232 or IR insertion from the DTP T FB 232 control port to the Over TP port.
Serial control pass-through port 1 RS-232 and IR via (1) 3.5 mm, 5-pole captive screw connector
Serial control pin configuration Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd
Baud rates 300 to 115200 baud
Protocol 8 or 7 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
IR pass-through control port TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
IR control pin configuration 3 = GND, 4 = IR Tx, 5 = IR Rx
General
Power supply External
Input: 100 to 240 VAC, 50-60 Hz
Output:12 VDC,1.5 A,18 watts
Power consumption
Device 5.2 watts, 12 VDC
Device and power supply 6.4 watts, 100-240 VAC, 50-60 Hz
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation
Device 17.7 BTU/hr
Device and power supply 21.9 BTU/hr
Mounting
Floor box mount Ackermann GB3/OBO Betterman floor box, MK Electric CableLink Plus Single Pan floor box, MK Electric CableLink Plus Modular floor box, ElectraPlan floor box, and PUK floor box mountable
NOTE See the DTP T FB 232 User Guide for mounting considerations.
Enclosure type Metal
Enclosure dimensions 2.3" H x 2.8" W x 5.2" D*
(5.9 cm H x 7.2 cm W x 13.2 cm D)
(Dimensions exclude connectors)
* Depth is 6.1" (15.5 cm) including mounting tabs
Product weight 1.1 lbs (0.5 kg)
Regulatory compliance CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4340-083118-D10)
    null