我的位置：

集成 DTP 延长功能并符合 HDCP 标准的 8 路输入图像解析度转换演示切换器-IN1608 xi图片

爱思创Extron电子-集成 DTP 延长功能并符合 HDCP 标准的 8 路输入图像解析度转换演示切换器-IN1608 xi

厂家报价：面议产品状态：(在产)

集成 DTP 延长功能并符合 HDCP 标准的 8 路输入图像解析度转换演示切换器 IN1608 xi

产品品牌：爱思创EXTRON

产品类别：产品中心

地址：中国上海市松江区茸华路 686 号

电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

咨询加入收藏我要评价

咨询

所在单位:	*
姓名:	*
手机:	*
职位:
邮箱:	*
其他联系方式:
咨询内容:
验证码:	不能为空验证码错误

确定

厂商介绍：爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

访问企业子网

经销商	联系方式	价格
爱思创Extron电子	4000.398766、 021-3760 1568	面议

IN1608 xi

Video input

Number/signal type

Local input

2 RGB, RGBcvS, component video (YUVi/YUVp/HDTV), S-video, composite
4 HDMI/DVI (HDCP compliant)

Remote inputs

2 DTP 330 (HDCP compliant)

Connectors

2 female 15-pin HD
4 female HDMI type A
2 female RJ-45 connectors

HDMI equalization

Automatic

HDMI input cable length

Up to 75' (22.9 m) for all supported input rates

Nominal level

1 Vp-p for Y of component video and S-video, and for composite
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain

Impedance

75 ohms

Horizontal frequency

15 kHz to 100 kHz

Vertical frequency

24 Hz to 75 Hz

Resolution range

640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K
*reduced blanking

Return loss

>30 dB @ 5 MHz

DC offset (max. allowable)

1.5 V

Video processing

Decoder

12 bit digital (3D adaptive comb filter)

Analog sampling

12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB)

Digital pixel data bit depth

8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)

Colors

1 billion (10 bit processing)

Video output

Number/signal type

Local output

2 HDMI/DVI (HDCP compliant)

Remote output

1 DTP 330 or HDBaseT (configurable HDCP compliant)

Connectors

2 female HDMI
1 female RJ-45 connector

HDMI peripheral device power

200 mA per output

Scaled resolution

640x480 ^6,8,9 , 800x600 ^6,8,9 , 852x480 ^6,8,9 , 1024x768 ^6,8,9 , 1024x852 ^6,8,9 , 1024x1024 ^6,8,9 , 1280x768 ^6,8,9 , 1280x800 ^6,8,9 , 1280x1024 ^6,8,9 , 1360x765 ^6,8,9 , 1360x768 ^6,8,9 , 1365x768 ^6,8,9 , 1365x1024 ^6,8,9 , 1366x768 ^6,8,9 , 1400x1050 ^6,8 , 1440x900 ^6,8,9 , 1600x900 ^6,8 , 1600x1200 ^6,8 , 1680x1050 ^6,8 , 1920x1200 ^6,8
HDTV 480p ^7,8 , 576p ⁶ , 720p ^3,4,5,6,7,8 , 1080i ^6,7,8 , 1080p ^{1,2,3,4,5,6,7,8} , 2048x1080 ^{1,2,3,4,5,6,7,8}
¹ = at 23.98 Hz, ² = at 24 Hz, ³ = at 25 Hz, ⁴ = at 29.97 Hz, ⁵ = at 30 Hz, ⁶ = at 50 Hz, ⁷ = at 59.94 Hz, ⁸ = at 60 Hz, ⁹ = at 75 Hz

Sync

Input type

RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video

Input standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Input level

2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video with tri-level sync
0.3 Vp-p for component video with bi-level sync or RGsB

Input impedance

Horizontal: 510 ohms
Vertical: 510 ohms

Max. input voltage

5.0 Vp-p

Shielded twisted pair interconnection

Connectors

3 female RJ-45

Termination standard

TIA/EIA-T568B

Signal transmission distance

DTP 330

Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable

HDBaseT

Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable

Cable requirements

Solid conductor, 24 AWG or better

Cable recommendations

400 MHz bandwidth, STP (shielded twisted pair)

NOTE	Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

NOTE	Output signals: DTP : HDMI with embedded audio, analog audio, RS-232 and IR, and remote power HDBaseT :HDMI with embedded audio, RS-232, and IR

Audio

Gain

Unbalanced output: -6 dB; balanced output: 0 dB

Frequency response

20 Hz to 20k Hz, ±0.5 dB

THD + Noise

<0.1%, 20 Hz to 20k Hz at nominal level

S/N

>90 dB at maximum balanced output (unweighted)

Crosstalk

≤-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

Bass

+12 dB to -24 dB @ 100 Hz

Treble

+12 dB to -24 dB @ 8 kHz

Audio input

Number/signal type

8 stereo line level balanced or unbalanced
2 mono mic/line level balanced or unbalanced (with available phantom power)
4 stereo, de-embedded from HDMI (PCM only)
2 DTP (de-embedded from HDMI [PCM only], or remote balanced/unbalanced, analog)

Connectors

(6) 3.5 mm captive screw connectors, 5 pole for line
(2) 3.5 mm captive screw connectors, 3 pole for mic/line
4 female HDMI type A
2 female RJ-45 connectors

Impedance

>10k ohms unbalanced, >20k ohms balanced

Nominal level

Line inputs: +4 dBu, -10 dBV, adjustable
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable

Maximum level

+21 dBu at rated THD+N when input gain is set to 0 dB

CMRR

>80 dB @ 1 kHz

Input gain adjustment

Line inputs: -18 dB to +24 dB, 1 dB steps, adjustable per input
Mic/line inputs: -18 dB to +60 dB, 1 dB steps, adjustable per input
LPCM-2Ch: -18 dB to +24 dB, 0.1 dB steps, adjustable per input

NOTE	Unbalanced analog inputs applied at a DTP transmitter input have +12 dB of gain applied to bring the signal to a nominal level for balanced operation.

DC phantom power

+48 VDC ±10% (can be switched on or off per mic/line input)

Audio output

Number/signal type

Local outputs

1 balanced or unbalanced stereo (variable)
1 balanced or unbalanced stereo; can be configured as stereo or two independently mixed mono channels
2 HDMI embedded

Remote output

1 DTP (embedded digital and remote balanced/unbalanced analog) or 1 HDBaseT (embedded digital)

Connectors

(2) 3.5 mm captive screw connectors, 5 pole
2 female HDMI
1 RJ-45 connector

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.5 dB channel to channel

Maximum level (Hi-Z)

>+20 dBu, balanced; >+14 dBu, unbalanced

Output volume range

0 to -100 dB in 1 dB steps

NOTE	System gain for the analog DTPreceiver output is rated at -12 dB (unbalanced) and -6 dB (balanced).

Audio output — power amplifier (MA and SA models only)

Number/signal type

Stereo models

1 stereo (default) or 2 mono (2 channels total)

Mono models

1 mono, 70 V line

Connectors

NOTE	This connector accepts wires of 22 AWG to 12 AWG.

Stereo models

(1) 5 mm screw lock captive screw connector, 4 pole

Mono models

(1) 5 mm screw lock captive screw connector, 2 pole

Load impedance

Stereo models

4 ohms minimum

Mono models

50 ohms minimum

High pass filter — MA models only

100 Hz, 12 dB/octave roll off

Frequency response

Stereo models

20 Hz to 20 kHz,-3 dB to+1 dB @ 1 W

Mono models

100 Hz to 20 kHz, -3 dB to +1 dB @ 1 W

THD + Noise

<0.1% @ 1 kHz, 3 dB below clipping

S/N

>90 dB, 20 Hz to 20 kHz, unweighted

Amplifier type

Class D

Output power

Stereo models

25 watts per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts per channel, 4 ohms, 1 kHz, 0.1% THD

Mono models

100 watts (rms) @ 70 V, 1 kHz, 0.1% THD

Protection

Clip limiting, thermal, short circuit, DC output

Communications — scaling presentation switcher

Serial control port

1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (rear panel)

Baud rate and protocol

9600, 8 data bits, 1 stop bit, no parity (default)

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd

USB control port

1 front panel female mini USB B

USB standards

USB 2.0, high speed

All models except IPCP models

Ethernet control port

1 female RJ-45 connector

Ethernet protocol

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet

Ethernet data rate

10/100Base-T, half/full duplex with autodetect

Ethernet default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off

Program control

Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS ^™ )
Microsoft® Internet Explorer®

Communications — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over DTP or RS-232/IR over HDBT)

NOTE

Protocol is mirrored between the connected twisted pair endpoints and the "Over DTP" or "Over TP" ports on the IN1608 xi. Signals from a control device pass into each IN1608 xi "Over DTP" or "Over TP" port, are embedded with the twisted pair signal, and sent to individual twisted pair Tx or Rx endpoints for control of remote sink or source devices.
The "Over DTP" or "Over TP" IR connections are simply pass-through connections to twisted pair endpoints, and there is no IR insert from any IN1608 xi control port to “Over DTP” or “Over TP” ports. RS-232 can be inserted from the IN1608 xi Ethernet connection.

Serial control pass-through ports

IN1608 xi input/DTP Tx

RS-232 via (2) 3.5 mm, 5 pole captive screw connectors (shared with IR ports)

IN1608 xi output/TP Rx

RS-232 via (1) 3.5 mm, 5 pole captive screw connector (shared with IR port)

Baud rates

Up to 115200 baud

Protocol

6 - 8 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
flow control = XON, XOFF, none

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd

IR pass-through control ports

TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz

IN1608 xi input/DTP Tx

(2) 3.5 mm captive screw connectors, 5 pole (shared with RS-232 ports)

IN1608 xi output/TP Rx

(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232 port)

IR control pin configuration

3 = Gnd, 4 = IR Tx, 5 = IR Rx

Communications — IPCP Pro dual-NIC embedded control processor — IPCP models only

Memory

SDRAM

512 MB

Flash

4.5 GB

Software and control options

Software

Extron Global Configurator® Plus and Professional for Windows®

Control options

GlobalViewer ^® , Extron control for iPad and web, or TouchLink Pro touchpanels, or eBUS ^® button panels

Ethernet control

Network interface controllers (NICs)

2: 1 LAN, 1 AV LAN

Network switch

1 AV unmanaged 3 port switch

Connectors

LAN: 1 female RJ-45 connector
AV LAN: 3 female RJ-45 connectors

Data rate

10/100/1000Base-T, half/full duplex with autodetect

Protocols

DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP

Default settings

LAN

Link speed and duplex level = autodetected
IP address = 192.168.253.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1

AV LAN

Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP server = disabled
DNS: 127.0.0.1

DHCP server disabled

IP address = 192.168.254.250
DNS: 127.0.0.1

DHCP server enabled

IP address = 192.168.254.1
Dynamic leased IP address pool = 192.168.254.100 - 192.168.254.149
Maximum lease count = 50
Lease time = 24 hours

Serial control

Quantity/type

1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)

Connectors

(1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 pole

Baud rate and protocol

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity

NOTE	The 5-pole ports support both hardware and software flow control. The 3-pole ports support software flow control. The default for both types of ports is no flow control.

Pin configurations, serial, 5-pole captive screw

RS-232 (default)

Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS

RS-422

Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+

RS-485

Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+

Pin configurations, serial, 3-pole captive screw

Pin 1 = Tx, 2 = Rx, 3 = Gnd

Digital I/O control

Quantity/type

4 digital input/output (configurable)

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Digital inputs

Input voltage range

0 to 24 VDC, clamped at +30 VDC

Input impedance

>10k ohms

Programmable pullup

1k ohms to +5 VDC

Threshold low to high

>2.8 VDC

Threshold high to low

<2.0 VDC

Digital outputs

250 mA sink from 24 VDC max.

Pin configurations

1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd

IR/serial control

Quantity/type

2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz

Connector

(1) 3.5 mm captive screw connector, 5-pole

Baud rate and protocol (RS-232)

300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity

Pin configurations

For each port, pin 1= signal, 2 = Gnd

IR output carrier frequency

30 kHz to 300 kHz

Relay control

Quantity/type

4 normally open relays

Relay control connectors

(1) 3.5 mm captive screw connector, 6 pole

Relay control contact rating

24 VDC, 1 A

eBUS control

eBUS control ports

(1) 3.5 mm captive screw connector, 5 pole (uses 4 poles)

eBUS pin configuration

+V = +12 VDC; +S = + signal; -S = - signal; G = ground

Recommended cable type

Extron STP20-2/1000 or STP20-2P/1000 cable

Maximum system cable length

1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details.

eBUS power output

6 watts

General

Power supply

Internal
Input: 100-240 VAC, 50-60 Hz

Power consumption

Full load (amp output at 1/8 power)

IN1608 xi

42 watts

All xi amplifier models except IPCP models

67 watts

All xi IPCP models

76 watts

Power save mode

IN1608 xi

<33 watts

All xi amplifier models except IPCP models

<42 watts

All xi IPCP models

<47 watts

Remote power capability

HDBaseT mode

Supports up to two endpoints (two DTP Tx)

DTP mode

Supports up to three endpoints (two DTP Tx, one DTP Rx)

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Fans, air flows right to left (as viewed from front panel)

Fan noise

<37 dB(A) at 1 m

Thermal dissipation

Full load (amp output at 1/8 power)

IN1608 xi

123 BTU/hr

All xi amplifier models except IPCP models

149 BTU/hr

All xi IPCP models

179 BTU/hr

Power save mode

IN1608 xi

<94 BTU/hr

All xi amplifier models except IPCP models

<110 BTU/hr

All xi IPCP models

<144 BTU/hr

Mounting

Rack mount

Yes, with included, pre-installed brackets

Enclosure type

Metal

Enclosure dimensions

IN1608 xi

1.72" H x 17.5" W x 9.5" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)

All other models

3.47" H x 17.5" W x 9.5" D (2U high, full rack wide)
(8.8 cm H x44.4 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)

Product weight

IN1608 xi

5.0 lbs (2.3 kg)

All amplifier models except IPCP models

7.4 lbs (3.4 kg)

All IPCP models

7.9 lbs (3.6 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Environmental

Complies with the appropriate requirements of RoHS, WEEE.

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(4135-D2)

更多爱思创Extron电子产品

查看详情

产品型号：XTP II CrossPoint 1600-带 SpeedSwitch 技术的模块化数字矩阵切换器，尺寸从 4x4 至 16x16 不等

名称：带 SpeedSwitch 技术的模块化数字矩阵切换器，尺寸从 4x4 至 16x16 不等

报价：面议 (在产)

经销商:爱思创Extron电子
4000.398766、 021-3760 1568
查看详情

产品型号：XTP R HDMI-HDMI 接收器

名称：HDMI 接收器

报价：面议 (促销)

经销商:爱思创Extron电子
4000.398766、 021-3760 1568
查看详情

产品型号：XTP SR HDMI-XTP 图像解析度转换接收器

名称：XTP 图像解析度转换接收器

报价：面议 (促销)

经销商:爱思创Extron电子
4000.398766、 021-3760 1568
查看详情

产品型号：XTP T HWP 101-用于 HDMI 信号的 XTP 发送器 - Decorator 型墙面板

名称：用于 HDMI 信号的 XTP 发送器 - Decorator 型墙面板

报价：面议 (促销)

经销商:爱思创Extron电子
4000.398766、 021-3760 1568
查看详情

产品型号：XTP T UWP 302-2 路输入 XTP 发送器 - 墙面板

名称：2 路输入 XTP 发送器 - 墙面板

报价：面议 (促销)

经销商:爱思创Extron电子
4000.398766、 021-3760 1568

我的位置：

爱思创Extron电子-﻿﻿集成 DTP 延长功能并符合 HDCP 标准的 8 路输入图像解析度转换演示切换器-IN1608 xi

发表评论

爱思创Extron电子-集成 DTP 延长功能并符合 HDCP 标准的 8 路输入图像解析度转换演示切换器-IN1608 xi