• 资讯
  • 产品
  • 企业
  • 招标
  • 项目
  • 电话
数字音视工程网

微信公众号

数字音视工程网

手机DAV

  • 热门搜索：
  • 技术风向标
  • 投影机
  • 数字标牌
  • LED小间距
    • null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    艾索
    null
    null
    null
    null
    null
    招商,
    null

    我的位置：

    爱思创Extron电子-10x8 无缝 4K 图像解析度转换演示矩阵切换器-DTP CrossPoint 108 4K

    厂家报价：面议 产品状态：(在产)

    10x8 无缝 4K 图像解析度转换演示矩阵切换器 DTP CrossPoint 108 4K

    产品品牌： 爱思创EXTRON
    产品类别： 产品中心

    地址：中国上海市松江区茸华路 686 号

    电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

    咨询 加入收藏 我要评价
    咨询
    所在单位:*
    姓名:*
    手机:*
    职位:
    邮箱:*
    其他联系方式:
    咨询内容:
    验证码:
    不能为空 验证码错误
    确定
    爱思创电子（上海）有限公司_爱思创Extron中国

    厂商介绍： 爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

    访问企业子网
    经销商 联系方式 价格
    爱思创Extron电子 4000.398766、 021-3760 1568 面议
    DTP CrossPoint 108 4K
    specification
    Frame rate 1 24, 25, 30, 50, or 60 fps
    Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0
    Color bit depth 1 8 bits per color
    Signal type HDMI 1.4, HDCP 1.4
    Max. video data rate 10.2 Gbps (3.4 Gbps per color)
    NOTE 1 Subject to the maximum data rate limit. Use our calculator ( http://www.extron.com/product/videotools.aspx ) to determine video parameters supported by this data rate.
    Video
    Routing 10 x 8 matrix
    Maximum data rate 10.2 Gbps (3.4 Gbps per color)
    Maximum pixel clock 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling)
    Resolution Up to 2560x1600* @ 60 Hz or
    4K (4096x2160) @30 Hz, UHD (3840x2160) @ 30 Hz
    4K/UHD @ 60 Hz with 4:2:0 chroma subsampling**
    (* reduced blanking)
    (** supported only at non-scaled HDMI outputs)
    Formats RGB and YCbCr digital video
    Standards DVI 1.0, HDMI 1.4, HDCP 1.4, CEA-861E
    Video input
    Number/signal type 6HDMI digital video (HDCP compliant)
    4DTPor XTP (configurable)
    Connectors 6female HDMI type A
    4female RJ-45
    Matrix video outputs (non scaled)
    Number/signal type 4 HDMI digital video (HDCP compliant)
    Connectors 4 female HDMI
    Video output power for active cables (HDMI pin 18) 6.6 W total power for all HDMI ports, 1.1 W per HDMI port max
    Scaled TP outputs
    Number/signal type 4 DTP, XTP, or HDBaseT (configurable)
    2 buffered HDMI digital video (HDCP compliant)
    Connectors 4female RJ-45
    2 female HDMI
    Video processing
    Digital pixel data bit depth 8, 10, or 12 bits per channel;300 MHz pixel clock (HDMI)
    Colors 1.07 billion (10-bit processing)
    Video input
    Horizontal frequency 15 kHz to 100 kHz
    Vertical frequency 24 Hz to 75 Hz
    Resolution range 640x480 to 1600x1200 and 1920x1200* 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K through 4K @ 30 Hz
    *reduced blanking
    Scaled resolutions 640x480 8 , 800x600 8 , 852x480 8 , 1024x768 8 , 1024x852 8 , 1024x1024 8 ,1280x768 8 , 1280x800 8 , 1280x1024 8 , 1360x765 8 , 1360x768 8 , 1365x768 8 , 1366x768 8 , 1365x1024 8 , 1400x1050 8 , 1440x900 8 , 1600x900 8 , 1600x1200 8 , 1680x1050 8 , 1920x1200 8 HDTV 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 2048x1080 1,2,3,4,5,6,7,8,, 1920x2160 1,2,3,4,5,6,7,8 , 1920x2400 2,3,5,8 , 2048x1200 8 , 2048x1536 8 , 2048x2160 1,2,3,4,5,6,7,8 , 2048x2400 2,3,5,8 , 2560x1080 8 , 2560x1440 8 , 2560x1600 8 , 3840x2160 1,2,3,4,5 , 3840x2400 5 , 4096x2160 1,2,3,4,5
    1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz,
    6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60Hz
    Logos
    Number 16 logos
    Resolution range Up to 4096x2160
    Image file formats BMP, JPG, PNG, TIFF
    Logo effects Transparency, RGB key, level key, alpha key
    Shielded twisted pair interconnection
    Connectors Female RJ-45
    Termination standard TIA/EIA T568B
    Signal transmission distance
    Resolutions up to 1920x1200 and 1080p
    DTP 330 Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable
    DTP 230 Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 TP cable
    2560x1600* and 4k @ 30 Hz (* reduced blanking)
    DTP 330 Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable
    DTP 230 Up to 130' (40 m) using shielded twisted pair cable or XTP DTP 24 TP cable
    Cable requirements Solid conductor, 24 AWG or better
    Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair)
    NOTE Extron XTP DTP 24 shielded twisted pair cableis strongly recommended for optimal performance.
    NOTE Input and output mode signaling:
    DTP : HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
    XTP : HDMI with embedded audio plus RS-232 and IR
    HDBT : HDMI with embedded audio plus RS-232 and IR
    Audio system (mic/line input to line output)
    Gain Unbalanced output: -6 dB; balanced output: 0 dB
    Frequency response 20 Hz to 20 kHz, ±0.2 dB
    Input impedance >10k ohms unbalanced, >20k ohms balanced
    THD + Noise 0.01% at 1 kHz nominal level
    S/N 105 dB at maximum balanced output (unweighted)
    Crosstalk <-90 dB @ 20 Hz to 20 kHz, fully loaded
    Stereo channel separation >80 dB @ 20 Hz to 20 kHz
    Digital conversion 24-bit, 48 kHz
    Audio
    Routing 10x8 stereo switching matrix
    4 x 4 microphone mixing matrix
    Supported formats — Pass through
    HDMI connectors LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
    Analog conectors Analog stereo audio
    DTP connectors De-embedded from HDMI [PCM only] or remote balanced/unbalanced analog
    Audio input
    Number/signal type 6 stereo, analog line level, balanced or unbalanced
    6stereo, de-embedded from HDMI (PCM only)
    4DTP (de-embedded from HDMI [PCM only] and remote balanced/unbalanced analog), orXTP (embedded digital)
    Connectors (6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs
    6female HDMI type A
    4female RJ-45
    Analog audio
    Nominal level +4 dBu, -10 dBV adjustable via input gain
    Maximum level +21 dBu balanced, +15 dBu unbalanced
    Input gain adjustment -18 dB to +24 dB, 0.1 dB steps, adjustable per input
    NOTE Unbalanced analog inputs at a DTP Tx input have +12 dB of gain applied to bring the signal to a nominal level for balanced operation.
    NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
    Mic/line input
    Number/signal type 4 mono, mic/line, balanced/unbalanced (with phantom power)
    Connectors (4) 3.5 mm captive screw connectors, 3-pole
    Impedance 10k ohms unbalanced, 20k ohms balanced
    Nominal level -60 dBV, +4 dBu, -10 dBV, adjustable via input gain
    Maximum level >+21 dBu at rated THD+N when mic gain is set to 0 dB
    Equivalent input noise <-120 dBV (1.0µVrms) at +40 dB input gain
    CMRR >70 dB typical
    Input gain adjustment -18 dB to +80 dB, in 0.1 dB steps, adjustable per input
    Microphone volume range -100 dB to +12 dB
    DC phantom power +48 VDC, ±10%(inputs 1-4) switched on or off
    Audio output
    Number/signal type 6HDMI embedded
    4DTP(embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), orHDBaseT (embedded digital)
    4stereo balanced/unbalanced analog (variable)
    1 SPDIF
    Connectors 6female HDMI
    4RJ-45
    (4) 3.5 mm captive screw, 5-pole
    (1) RCA
    Impedance
    Stereo audio 50 ohms unbalanced, 100 ohms balanced
    S/PDIF 75 ohms
    Gain error ±0.1 dB channel to channel
    Maximum level (Hi-Z) >+21 dBu, balanced or +15 dBu unbalanced
    Output volume range 0 to -100 dB in 0.1 dB steps
    EXP port
    Transmission type Proprietary
    Connectors 1 RJ-45
    Inputs 16 channels Rx
    Outputs 16 channels Tx
    Audio format 24 bit, 48 kHz sampling, uncompressed
    EXP cable Shielded CAT 6 up to 10 meters
    Audio output — power amplifier (DTP CrossPoint 108 4K IPCP SA and DTP CrossPoint108 4K IPCP MA models)
    Number/signal type
    SA models 1 stereo ormono (2 channels total)
    MA models 1 mono, 70 V
    Connector
    NOTE This connector accepts wires of 22 AWG to 12 AWG.
    SA models (1) 5 mm screw lock captive screw connector, 4-pole
    MA models (1) 5 mm screw lock captive screw connector, 2-pole
    Load impedance
    SA models 4 ohms minimum
    MA models 50 ohms minimum
    High pass filter (MA models) 80 Hz, 12 dB/octave roll off
    Amplifier type Class D
    Output power
    SA models 25 watts (rms) per channel, 8 ohms, 1 kHz, 0.1% THD
    50 watts per channel, 4 ohms, 1 kHz, 0.1% THD
    MA models 100 watts (rms) @ 70 V, 1 kHz, 0.1% THD
    Protection Clip limiting, thermal, short circuit, DC output
    Frequency response
    SA models 20 Hz to 20 kHz, +1/−3 dB @ 1 watt
    MA models 80 Hz to 20 kHz, +1/−3 dB @ 1 watt
    THD + Noise <0.1%, 1 kHz, 3 dB below clipping
    S/N >90 dB, 20 Hz to 20 kHz, unweighted
    Communications — switcher
    Serial control port 1 bidirectional RS-232, 3.5 mm captive screw connector, 3-pole (rear panel)
    Baud rate and protocol 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity (default)
    Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
    USB control port 1 front panel female USB mini-B
    USB standards USB 2.0, low speed
    Ethernet control port 1 female RJ-45 connector
    Ethernet data rate 10/100Base-T, half/full duplex with autodetect
    Ethernet protocol DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP, ARP, Telnet
    Ethernet default settings Link speed and duplex level = autodetected
    IP address = 192.168.254.254
    Subnet mask = 255.255.0.0
    Default gateway = 0.0.0.0
    DHCP = off
    Web server Up to 200 simultaneous sessions
    40.0MB nonvolatile user memory
    Program control Extron control/configuration program for Windows ®
    Extron Simple Instruction Set (SIS ™ )
    Microsoft ® Internet Explorer ® , Telnet
    Communications — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over TP)
    NOTE Protocol is mirrored between the connected TPendpoints and the "Over TP" ports on the DTP CrossPoint switcher. Signals from a control device pass into eachDTP CrossPoint108"Over TP" port, are embedded with the TP signal, and sent to individual TP Tx or Rx endpoints for control of remote sink or source devices.
    The "Over TP" ports are simply pass-through connections to TP endpoints. There is no IR insertion from anyDTP CrossPoint108control port to the “Over TP” ports. RS-232 can be inserted from the Ethernet connection.
    Serial control pass-through ports
    DTP CrossPoint 108 input/TP Tx RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports)
    DTP CrossPoint 108 output/TP Rx RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports)
    Baud rates 300 to 115200 baud
    Protocol 8 or 7 data bits
    1 or 2 stop bits
    no parity (default), even, odd, mark, or spaceparity
    Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
    IR pass-through control ports (1) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
    DTP CrossPoint switcher input/TP Tx (4) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports)
    DTP CrossPoint switcher output/TP Rx (4) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports)
    IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx
    Control Processor – DTP CrossPoint 108 4K IPCP Models
    Memory
    SDRAM 512 MB
    Flash 4.5 GB
    Software and control options
    Software Extron Global Configurator Plus and Professional for Windows ®
    Control options GlobalViewer ® , TouchLink ® for Web, TouchLink for iPad ® , or TouchLink Pro touchpanels
    Ethernet control
    Network interface controllers (NICs) 1
    Network switch 1 unmanaged 3 port switch
    Connectors 3 female RJ-45 connectors
    Data rate 10/100/1000Base-T, half/full duplex with autodetect
    Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
    Default settings Link speed and duplex level = autodetected
    IP address = 192.168.254.250
    Subnet mask = 255.255.255.0
    Gateway = 0.0.0.0
    DHCP = off
    DNS: 127.0.0.1
    Serial control
    Quantity/type 1 bidirectional RS-232, RS-422, RS-485 (port 1)
    2 bidirectional RS-232 (ports 2 and 3)
    Connectors (1) 3.5 mm captive screw connector, 5-pole
    (2) 3.5 mm captive screw connectors, 3-pole
    Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
    no parity (default), even, odd, mark, or space parity
    NOTE The 5-pole ports support both hardware and software flow control.
    The 3-pole ports support software flow control.
    The default for both types of ports is no flow control.
    Pin configurations, serial, 5-pole captive screw
    RS-232 (default) Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS
    RS-422 Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+
    RS-485 Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+
    Pin configurations, serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd
    Digital I/O control
    Quantity/type 4 digital input/output (configurable)
    Connectors (1) 3.5 mm captive screw connector, 5-pole
    Digital inputs
    Input voltage range 0 to 24 VDC, clamped at +30 VDC
    Input impedance 29k ohms
    Programmable pullup 1k ohms to +5 VDC
    Threshold low to high >2.8 VDC
    Threshold high to low <2.0 VDC
    Digital outputs 250 mA sink from 24 VDC max.
    Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd
    IR/serial control
    Quantity/type 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
    Connector (1) 3.5 mm captive screw connector, 5-pole
    Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
    no parity (default), even, odd, mark, or space parity
    Pin configurations For each port, pin 1= signal, 2 = Gnd
    IR output carrier frequency 30 kHz to 300 kHz
    Relay control
    Quantity/type 4 normally open relays
    Relay control connectors (1) 3.5 mm captive screw connector, 6-pole
    Relay control contact rating 24 VDC, 1 A
    General
    Power supply Internal
    Input: 100-240 VAC, 50-60 Hz
    Power consumption
    DTP CrossPoint 108 4K IPCP MA 184 watts
    DTP CrossPoint 108 4K IPCP SA 179 watts
    DTP CrossPoint 108 4K (non-IPCP) 154 watts
    Remote power capability Supports up toeight endpoints (four DTP Tx,four DTP Rx) (remote power not available in XTP and HDBaseT modes)
    Temperature/humidity Storage: -40 to +104 °F (-40 to +40 °C) / 10% to 90%, noncondensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling Fans, air flows from right to left (as viewed from front panel)
    Thermal dissipation
    DTP CrossPoint 108 4K IPCP MA 499BTU/hr
    DTP CrossPoint 108 4K IPCP SA 486BTU/hr
    DTP CrossPoint 108 4K (non-IPCP) 440 BTU/hr
    Mounting
    Rack mount Yes
    Enclosure type Metal
    Enclosure dimensions 5.25" H x 17.4" W x 16" D (3U high, full rack wide)
    (133 mmH x 432 mm W x406 mm D)
    (Depth excludes connectors and knobs. Width excludes rack ears.)
    Product weight 17 lbs (7.7 kg)
    Regulatory compliance CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI,
    complies with the appropriate requirements of RoHS, WEEE.
    Product warranty 3 years parts and labor
    NOTE Specifications are subject to change without notice.
    NOTE All nominal levels are at ±10%.
    (4633-D15-070819)
      null