我的位置：
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| DTP CrossPoint 84 Series | |||
 specification |
|||
|---|---|---|---|
 |
|||
| Frame rate 1 | 24, 25, 30, 50, or 60 fps | ||
| Chroma sampling 1 | 4:4:4, 4:2:2, or 4:2:0 | ||
| Color bit depth 1 | 8 bits per color | ||
| Signal type | HDMI 1.4, HDCP 1.4 | ||
| Max. video data rate | 10.2 Gbps (3.4 Gbps per color) | ||
|
|||
| Video | |||
| Routing | 8 x 4 matrix | ||
| Maximum data rate | 10.2 Gbps (3.4 Gbps per color) | ||
| Maximum pixel clock | 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling) | ||
| Resolution | Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @30 Hz, UHD (3840x2160) @ 30 Hz 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling (* reduced blanking) |
||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI, HDCP 1.3, CEA-861E | ||
| Video input | |||
| Number/signal type | 6HDMI digital video (HDCP compliant) 2 DTPor XTP (configurable) |
||
| Connectors | 6female HDMI type A 2 female RJ-45 |
||
| Matrix video outputs (non scaled) | |||
| Number/signal type | 2 HDMI digital video (HDCP compliant) | ||
| Connectors | 2 female HDMI | ||
| Scaled TP outputs | |||
| Number/signal type | 2 DTP, XTP, or HDBaseT (configurable) | ||
| Connectors | 2 female RJ-45 | ||
| Video processing | |||
| Digital pixel data bit depth | 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI) | ||
| Colors | 1.07 billion (10-bit processing) | ||
| Video input | |||
| Horizontal frequency | 15 kHz to 100 kHz | ||
| Vertical frequency | 24 Hz to 75 Hz | ||
| Resolution range | 640x480 to 1600x1200 and 1920x1200* 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K *reduced blanking |
||
| Scaled resolutions | 640x480 8 , 800x600 8 , 852x480 8 , 1024x768 8 , 1024x852 8 , 1024x1024 8 ,1280x768 8 , 1280x800 8 , 1280x1024 8 , 1360x765 8 , 1360x768 8 , 1365x768 8 , 1366x768 8 , 1365x1024 8 , 1400x1050 8 , 1440x900 8 , 1600x900 8 , 1600x1200 8 , 1680x1050 8 , 1920x1200 8 HDTV 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 2048x1080 1,2,3,4,5,6,7,8 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60Hz |
||
| Shielded twisted pair interconnection | |||
| Connectors | Female RJ-45 | ||
| Termination standard | TIA/EIA T568B | ||
| Signal transmission distance | |||
| Resolutions up to 1920x1200 and 1080p | |||
| DTP 330 | Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable | ||
| DTP 230 | Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 TP cable | ||
| 2560x1600* and 4k @ 30 Hz (* reduced blanking) | |||
| DTP 330 | Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable | ||
| DTP 230 | Up to 130' (40 m) using shielded twisted pair cable or XTP DTP 24 TP cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
|
|||
| Audio system (mic/line input to line output) | |||
| Gain | Unbalanced output: -6 dB; balanced output: 0 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.2 dB | ||
| Input impedance | >10k ohms unbalanced, >20k ohms balanced | ||
| THD + Noise | 0.01% at 1 kHz nominal level | ||
| S/N | 105 dB at maximum balanced output (unweighted) | ||
| Crosstalk | <-90 dB @ 20 Hz to 20 kHz, fully loaded | ||
| Stereo channel separation | >80 dB @ 20 Hz to 20 kHz | ||
| Digital conversion | 24-bit, 48 kHz | ||
| Audio | |||
| Routing | 8 x 4 stereo switching matrix 4 x 4 microphone mixing matrix |
||
| Supported formats — Pass through | |||
| HDMI connectors | LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel | ||
| Analog conectors | Analog stereo audio | ||
| DTP connectors | De-embedded from HDMI [PCM only] or remote balanced/unbalanced analog | ||
| Audio input | |||
| Number/signal type | 6 stereo, analog line level, balanced or unbalanced 6stereo, de-embedded from HDMI (PCM only) 2 DTP (de-embedded from HDMI [PCM only] and remote balanced/unbalanced analog), orXTP (embedded digital) |
||
| Connectors | (6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs 6female HDMI type A 2 female RJ-45 |
||
| Analog audio | |||
| Nominal level | +4 dBu, -10 dBV adjustable via input gain | ||
| Maximum level | +21 dBu balanced, +15 dBu unbalanced | ||
| Input gain adjustment | -18 dB to +24 dB, 0.1 dB steps, adjustable per input | ||
|
|||
|
|||
| Mic/line input | |||
| Number/signal type | 4 mono, mic/line, balanced/unbalanced (with phantom power) | ||
| Connectors | (4) 3.5 mm captive screw connectors, 3-pole | ||
| Impedance | 10k ohms unbalanced, 20k ohms balanced | ||
| Nominal level | -60 dBV, +4 dBu, -10 dBV, adjustable via input gain | ||
| Maximum level | >+21 dBu at rated THD+N when mic gain is set to 0 dB | ||
| Equivalent input noise | <-120 dBV (1.0µVrms) at +40 dB input gain | ||
| CMRR | >70 dB typical | ||
| Input gain adjustment | -18 dB to +80 dB, in 0.1 dB steps, adjustable per input | ||
| Microphone volume range | -100 dB to +12 dB | ||
| DC phantom power | +48 VDC, ±10%(inputs 1-4) switched on or off | ||
| Audio output | |||
| Number/signal type | 4HDMI embedded 2DTP(embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), orHDBaseT (embedded digital) 4stereo balanced/unbalanced analog (variable) |
||
| Connectors | 4female HDMI 2RJ-45 (4) 3.5 mm captive screw, 5-pole |
||
| Impedance | |||
| Stereo audio | 50 ohms unbalanced, 100 ohms balanced | ||
| S/PDIF | 75 ohms | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+21 dBu, balanced or +15 dBu unbalanced | ||
| Output volume range | 0 to -100 dB in 0.1 dB steps | ||
| EXP port | |||
| Transmission type | Proprietary | ||
| Connectors | 1 RJ-45 | ||
| Inputs | 8 channels Rx | ||
| Outputs | 16 channels Tx | ||
| Audio format | 24 bit, 48 kHz sampling, uncompressed | ||
| EXP cable | Shielded CAT 6 up to 10 meters | ||
| Audio output — power amplifier (DTP CrossPoint 84 IPCP SA and DTP CrossPoint 84 IPCP MA models) | |||
| Number/signal type | |||
| SA models | 1 stereo ormono (2 channels total) | ||
| MA models | 1 mono, 70 V | ||
| Connector | |||
|
|||
| SA models | (1) 5 mm screw lock captive screw connector, 4-pole | ||
| MA models | (1) 5 mm screw lock captive screw connector, 2-pole | ||
| Load impedance | |||
| SA models | 4 ohms minimum | ||
| MA models | 50 ohms minimum | ||
| High pass filter (MA models) | 80 Hz, 12 dB/octave roll off | ||
| Amplifier type | Class D | ||
| Output power | |||
| SA models | 25 watts (rms) per channel, 8 ohms, 1 kHz, 0.1% THD 50 watts per channel, 4 ohms, 1 kHz, 0.1% THD |
||
| MA models | 100 watts (rms) @ 70 V, 1 kHz, 0.1% THD | ||
| Protection | Clip limiting, thermal, short circuit, DC output | ||
| Frequency response | |||
| SA models | 20 Hz to 20 kHz, +1/−3 dB @ 1 watt | ||
| MA models | 80 Hz to 20 kHz, +1/−3 dB @ 1 watt | ||
| THD + Noise | <0.1%, 1 kHz, 3 dB below clipping | ||
| S/N | >90 dB, 20 Hz to 20 kHz, unweighted | ||
| Control/remote — switcher | |||
| Serial control port | 1 bidirectional RS-232, 3.5 mm captive screw connector, 3-pole (rear panel) | ||
| Baud rate and protocol | 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity (default) | ||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
| USB control port | 1 front panel female USB mini-B | ||
| USB standards | USB 2.0, low speed | ||
| Ethernet control port | 1 female RJ-45 connector | ||
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP, ARP, Telnet | ||
| Ethernet default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Web server | Up to 200 simultaneous sessions 40.0MB nonvolatile user memory |
||
| Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) Microsoft ® Internet Explorer ® , Telnet |
||
| Control/remote — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over TP) | |||
|
|||
| Serial control pass-through ports | |||
| DTP CrossPoint 84 input/TP Tx | RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports) | ||
| DTP CrossPoint 84 output/TP Rx | RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports) | ||
| Baud rates | 300 to 115200 baud | ||
| Protocol | 8 or 7 data bits 1 or 2 stop bits no parity (default), even or odd parity |
||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
| IR pass-through control ports | TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz | ||
| DTP CrossPoint 84 input/TP Tx | (2) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports) | ||
| DTP CrossPoint 84 output/TP Rx | (2) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports) | ||
| IR control pin configuration | 3 = Gnd, 4 = IR Tx, 5 = IR Rx | ||
| Control/remote — IPCP Pro 350 control processor (DTP CrossPoint 84 IPCP models) | |||
| Memory | |||
| SDRAM | 512 MB | ||
| Flash | 4.5 GB | ||
| Software and control options | |||
| Software | Extron Global Configurator Plus and Professional for Windows ® | ||
| Control options | GlobalViewer ® , TouchLink ® for Web, TouchLink for iPad ® , or TouchLink Pro touchpanels | ||
| Ethernet control | |||
| Network interface controllers (NICs) | 1 | ||
| Network switch | 1 unmanaged 3 port switch | ||
| Connectors | 3 female RJ-45 connectors | ||
| Data rate | 10/100/1000Base-T, half/full duplex with autodetect | ||
| Protocols | DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1 |
||
| Serial control | |||
| Quantity/type | 1 bidirectional RS-232, RS-422, RS-485 (port 1) 2 bidirectional RS-232 (ports 2 and 3) |
||
| Connectors | (1) 3.5 mm captive screw connector, 5-pole (2) 3.5 mm captive screw connectors, 3-pole |
||
| Baud rate and protocol | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, odd, mark, or space parity |
||
|
|||
| Pin configurations, serial, 5-pole captive screw | |||
| RS-232 (default) | Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS | ||
| RS-422 | Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+ | ||
| RS-485 | Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+ | ||
| Pin configurations, serial, 3-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = Gnd | ||
| Digital I/O control | |||
| Quantity/type | 4 digital input/output (configurable) | ||
| Connectors | (1) 3.5 mm captive screw connector, 5-pole | ||
| Digital inputs | |||
| Input voltage range | 0 to 24 VDC, clamped at +30 VDC | ||
| Input impedance | 29k ohms | ||
| Programmable pullup | 1k ohms to +5 VDC | ||
| Threshold low to high | >2.8 VDC | ||
| Threshold high to low | <2.0 VDC | ||
| Digital outputs | 250 mA sink from 24 VDC max. | ||
| Pin configurations | 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd | ||
| IR/serial control | |||
| Quantity/type | 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz | ||
| Connector | (1) 3.5 mm captive screw connector, 5-pole | ||
| Baud rate and protocol (RS-232) | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, odd, mark, or space parity |
||
| Pin configurations | For each port, pin 1= signal, 2 = Gnd | ||
| IR output carrier frequency | 30 kHz to 300 kHz | ||
| Relay control | |||
| Quantity/type | 4 normally open relays | ||
| Relay control connectors | (1) 3.5 mm captive screw connector, 6-pole | ||
| Relay control contact rating | 24 VDC, 1 A | ||
| General | |||
| Power supply | Internal Input: 100-240 VAC, 50-60 Hz |
||
| Power consumption | 111 watts | ||
| Remote power capability | Supports up to four endpoints (two DTP Tx, two DTP Rx) (remote power not available in XTP and HDBaseT modes) | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Fans, air flows from left to right (as viewed from front panel) | ||
| Thermal dissipation | 265 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 3.5" H x 17.4" W x 15.3" D (2U high, full rack wide) (8.9 cm H x 43.2 cm W x38.9 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) |
||
| Product weight | 11.4 lbs (5.2 kg) | ||
| Shipping weight | 14 lbs (6.0 kg) | ||
| DIM weight | 22 lbs (10 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (120216-D9) | |||
