• 资讯
  • 产品
  • 企业
  • 招标
  • 项目
  • 电话
数字音视工程网

微信公众号

数字音视工程网

手机DAV

  • 热门搜索：
  • 技术风向标
  • 投影机
  • 数字标牌
  • LED小间距
    • null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    艾索
    null
    null
    null
    null
    null
    招商,
    null

    我的位置：

    爱思创Extron电子-用于 DVI-D、音频和 RS-232 信号的光纤发送器-PowerCage FOX Tx DVI Plus

    厂家报价：面议 产品状态：(在产)

    用于 DVI-D、音频和 RS-232 信号的光纤发送器 PowerCage FOX Tx DVI Plus

    产品品牌： 爱思创EXTRON
    产品类别： 产品中心

    地址：中国上海市松江区茸华路 686 号

    电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

    咨询 加入收藏 我要评价
    咨询
    所在单位:*
    姓名:*
    手机:*
    职位:
    邮箱:*
    其他联系方式:
    咨询内容:
    验证码:
    不能为空 验证码错误
    确定
    爱思创电子（上海）有限公司_爱思创Extron中国

    厂商介绍： 爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

    访问企业子网
    经销商 联系方式 价格
    爱思创Extron电子 4000.398766、 021-3760 1568 面议
    PowerCage™ FOX Tx DVI Plus
    NOTE The PowerCage FOX Tx DVI Plus board is not compatible with the FOX3GHD-SDI, FOX3GDVC, or FOXAV models.
    NOTE The PowerCage FOX boards are available in singlemode or multimode versions.
    NOTE The PowerCage FOX Tx DVI board is a class1 laser product. It meets the safety regulations of IEC-60825.
    Optical fiber interconnection between fiber matrix switcher and receiver
    Number/type 1 singlemode or 1 multimode fiber optic input and output per board
    Connectors 2 bidirectional LC connectors per FOX board
    Operating distance
    Singlemode 30 km (18.75 miles) with singlemode (SM) cables with a SM board
    Multimode 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
    1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
    2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board
    NOTE Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
    Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM)
    Transmission power, singlemode or multimode -5 dBm, typical
    Maximum receiver sensitivity
    Singlemode -18 dBm, typical
    Multimode -12 dBm, typical
    Optical loss budget
    Singlemode 13 dB, maximum
    Multimode 7 dB, maximum
    Maximum channel data rate 4.25 Gbps
    Video
    Resolution range 640x480 up to 1920x1200 @ 60 Hz, including 480p, 576p, 720p, 1080i,
    1080p @ 60 Hz, sampled pixel for pixel; higher resolution 2K(2048x1080) @ 60 Hz, undersampled
    Format RGB
    Standards DVI 1.0, HDMI
    Video input
    Number/signal type 1 single link DVI-D (or HDMI*)
    Connector 1 female DVI-I
    NOTE *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. The PowerCage FOX Tx DVI Plus board can be used to distribute HDMI signals if you use a DVI-to-HDMI adapter. However, when using HDMI signals, these units do not transmit audio and CEC signals. This board does not support transmission of DVI signals with High-bandwidth Digital Content Protection (HDCP).
    Audio
    NOTE On thePowerCage FOX Tx DVI Plus board, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
    Gain
    Range Adjustable, -18 dB to +10 dB
    Default Unbalanced output: -6 dB; balanced output: 0 dB
    Frequency response 20 Hz to 20 kHz, ±0.5 dB
    THD + Noise 0.10% @ 1 kHz at nominal level
    S/N >80 dB at maximum output (unweighted)
    CMRR 65 dB @ 20 Hz to 20 kHz
    Audio bits per sample 18 bits per channel, 2 channels (L, R)
    Sampling rate 48 kHz
    Audio input
    Number/signal type 1 stereo, balanced/unbalanced or
    2 mono, balanced/unbalanced
    Connectors (1) 3.5 mm captive screw connector, 5 pole
    Impedance ≥10k ohms unbalanced, ≥20k ohms balanced
    Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
    Maximum level +8.9 dBV, unbalanced at 1% THD+N
    NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
    Control/remote
    Serial control ports
    Control 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port)
    Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles, "RS-232 Over Fiber")
    Baud rate and protocol
    Control 9600 baud, 8 data bits, 1 stop bit, no parity
    Pass-through 9600 to 115,200 baud
    Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
    Program control Extron control/configuration program for Windows ®
    Extron Simple Instruction Set (SIS ™ )
    General
    Power Supplied by a PowerCage 1600 enclosure
    Power consumption 5.68 watts
    Power input requirements 12 VDC, 1.0 A, supplied by the PowerCage enclosure
    Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling Enclosure: fans, front to back
    Boards: convection, within the PowerCage enclosure
    Thermal dissipation 27.6 BTU/hr
    Dimensions Each boardfits a double slot opening in a PowerCage enclosure.
    Product weight 1.1 lbs (0.5 kg)
    Shipping weight 2 lbs (1 kg)
    Vibration ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance
    Safety CE, c-UL, UL
    EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
    Environmental Complies with the appropriate requirements of RoHS, WEEE.
    Product warranty 3 years parts and labor
    NOTE All nominal levels are at ±10%.
    NOTE Specifications are subject to change without notice.
    (8.1-121114-D3)
      null