• 资讯
  • 产品
  • 企业
  • 招标
  • 项目
  • 电话
数字音视工程网

微信公众号

数字音视工程网

手机DAV

  • 热门搜索：
  • 技术风向标
  • 投影机
  • 数字标牌
  • LED小间距
    • null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    null
    艾索
    null
    null
    null
    null
    null
    招商,
    null

    我的位置：

    爱思创Extron电子-用于 DVI-D、音频和 RS-232 信号的光纤接收器-PowerCage FOX Rx DVI Plus

    厂家报价：面议 产品状态：(在产)

    用于 DVI-D、音频和 RS-232 信号的光纤接收器 PowerCage FOX Rx DVI Plus

    产品品牌： 爱思创EXTRON
    产品类别： 产品中心

    地址：中国上海市松江区茸华路 686 号

    电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)

    咨询 加入收藏 我要评价
    咨询
    所在单位:*
    姓名:*
    手机:*
    职位:
    邮箱:*
    其他联系方式:
    咨询内容:
    验证码:
    不能为空 验证码错误
    确定
    爱思创电子（上海）有限公司_爱思创Extron中国

    厂商介绍： 爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

    访问企业子网
    经销商 联系方式 价格
    爱思创Extron电子 4000.398766、 021-3760 1568 面议
    PowerCage™ FOX Rx DVI Plus
    NOTE The PowerCage FOX Rx DVI Plus is not compatible with the FOX3GHD-SDI, FOX3GDVC, or FOXAV models.
    NOTE The PowerCage FOX Rx DVI Plus board is available in singlemode or multimode version.
    NOTE The PowerCage FOX Rx DVI Plus board is a class1 laser product. It meets the safety regulations of IEC-60825.
    Optical fiber interconnection between transmitter and receiver
    Number/type 1 singlemode or 1 multimode fiber optic input and output per board
    NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit HDMI video with HDCP content or return data for bidirectional control and communication.
    Connectors 2 bidirectional LC connectors per FOX board
    Operating distance
    Singlemode 30 km (18.75 miles) with singlemode (SM) cables with a SM board
    Multimode 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
    1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
    2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board
    NOTE Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
    Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM)
    Transmission power, singlemode or multimode -5 dBm, typical
    Maximum receiver sensitivity
    Singlemode -18 dBm, typical
    Multimode -12 dBm, typical
    Optical loss budget
    Singlemode 13 dB, maximum
    Multimode 7 dB, maximum
    Maximum channel data rate 4.25 Gbps
    Video
    Resolution range 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i, 1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled
    Format RGB
    Standards DVI 1.0, HDMI
    Video output
    Number/signal type 1 single link DVI-D (or HDMI*)
    Connector 1 female DVI-I
    Nominal level 0.8 Vp-p
    Video delay 1-2 frames
    Audio
    NOTE On the PowerCage FOX Rx DVI Plus board, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
    Gain
    Range Adjustable, -18 dB to +10 dB
    Default Unbalanced output: -6 dB; balanced output: 0 dB
    Frequency response 20 Hz to 20 kHz, ±0.5 dB
    THD + Noise 0.10% @ 1 kHz at nominal level
    S/N >80 dB at maximum output (unweighted)
    CMRR 65 dB @ 20 Hz to 20 kHz
    Audio bits per sample 18 bits per channel, 2 channels (L, R)
    Sampling rate 48 kHz
    Audio output
    Number/signal type 1 stereo, balanced/unbalanced or
    2 mono, balanced/unbalanced
    Connectors (1) 3.5 mm captive screw connector, 5 pole
    Impedance 50 ohms unbalanced, 100 ohms balanced
    Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
    Maximum level (Hi-Z) +7.6 dBu, unbalanced at 1% THD+N
    Maximum level (600 ohm) >+6.3 dBu, unbalanced at 1% THD+N
    Audio delay 1.5 frames
    Control/remote
    Serial control ports
    Control 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port)
    Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used, "RS-232 Over Fiber")
    Baud rate and protocol
    Control 9600 baud, 8 data bits, 1 stop bit, no parity
    Pass-through 9600 to 115,200 baud
    Serial control pin configurations
    Captive screw connector 1 = Tx, 2 = Rx, 3 = GND
    Mini stereo jack RS-232: tip = Tx, ring = Rx, sleeve = GND
    Program control Extron control/configuration program for Windows ®
    Extron Simple Instruction Set (SIS ™ )
    General
    Power Supplied by a PowerCage 1600 enclosure
    Power consumption 6.18 watts
    Power input requirements 12 VDC, 1.0 A, supplied by the PowerCage enclosure
    Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling Enclosure: fans, front to back
    Boards: convection, within the PowerCage enclosure
    Thermal dissipation 27.6 BTU/hr
    Dimensions Each boardfits a double slot opening in a PowerCage enclosure.
    Product weight 1.1 lbs (0.5 kg)
    Shipping weight 2 lbs (1 kg)
    Vibration ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance
    Safety CE, c-UL, UL
    EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
    Environmental Complies with the appropriate requirements of RoHS, WEEE.
    Product warranty 3 years parts and labor
    NOTE All nominal levels are at ±10%.
    NOTE Specifications are subject to change without notice.
    (8.1-121114-D3)
      null