我的位置：
爱思创Extron电子-用于 HDMI、VGA、视频、音频和 RS-232 信号的通用型双绞线接收器-MTP/HDMI U R
厂家报价：面议
产品状态：(在产)
用于 HDMI、VGA、视频、音频和 RS-232 信号的通用型双绞线接收器 MTP/HDMI U R
产品品牌：
爱思创EXTRON
产品类别：
产品中心
地址：中国上海市松江区茸华路 686 号
电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| MTP/HDMI U R | |||
| Video | |||
|---|---|---|---|
| MTP input | |||
| Gain | Unity | ||
| Maximum resolution | |||
| Analog | Up to 2048x1080 or 1080p @ 60 Hz | ||
| Signal transmission distance, analog |  |
||
| HDMI digital input | |||
| Maximum data rate | 4.95 Gbps (1.65 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Maximum resolution | |||
| Digital | Up to 1920x1200 or 1080p @ 60 Hz | ||
| Signal transmission distance, digital |  |
||
|
|||
|
|||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI 1.2 | ||
| Video input | |||
| Number/signal type | |||
| MTP input | 1 set of proprietary analog signals | ||
| HDMI digital input | 1 set of proprietary digital signals | ||
| Connectors | |||
| MTP input | 1female RJ-45 | ||
| HDMI digital input | 2 female RJ-45 | ||
| Video output | |||
| Number/signal type | |||
| Analog output | 1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type) | ||
| HDMI digital output | 1 single link HDMI (or DVI-D*) | ||
|
|||
| Connectors | |||
| Analog output | 1 female 15-pin HD for RGB 3 female BNC for Y, R-Y, B-Y 1 female4-pin mini DIN for S-video (Y/C) 1 female BNC for composite video |
||
| HDMI digital output | 1 female HDMI type A | ||
| Nominal levels | Analog outputs: 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | Analog outputs: 0.8 V to 1.2 Vp-p | ||
| Impedance | Analog outputs: 75 ohms (during video output only) | ||
| Return loss | Analog outputs: <-30 dB @ 5 MHz (during video output only) | ||
| DC offset | Analog outputs: <±20 mV with input at 0 offset | ||
| Sync — analog outputs | |||
| Output type | RGBHV, RGBS, component video (bi- or tri-level) | ||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Output level | 4.0 V to 5.0 Vp-p, unterminated | ||
| Output impedance | 87 ohms (24 mA) | ||
| Polarity | Positive or negative (selectable) | ||
| Audio — from MTP input | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | >70 dB at maximum output (unweighted) | ||
| Audio input — fromMTP input, see MTP transmitter's audio output specifications | |||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | 1 female RJ-45 | ||
|
|||
| Audio output — from MTP input | |||
| Number/signal type | 2 mono, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±1 dB channel to channel | ||
| Control/remote — external device (pass-through) from the HDMI input | |||
| Serial control port input/output | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | ||
| Serial control pin configuration | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND | ||
| Control/remote — external device (pass-through, unidirectional or bidirectional) from theMTP input | |||
| Serial control port input/output | RS-232 via (1) 3.5 mm, 5 pole captive screw connector (3 poles are used) | ||
| Baud rates | Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.) |
||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
|
|||
| Serial control pin configuration | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND | ||
| General | |||
| Recommended cable type | Shielded or unshielded | ||
| MTP input | CAT 5/5e/6 | ||
| HDMI digital input | CAT 5/5e/6, Extron STP201 | ||
|
|||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
||
| Power input requirements | 12 VDC, 0.8 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Thermal dissipation | 18.1 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Pole mount | Yes, with optional projector mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7" H x 8.75" W x 3.0" D (half rack wide) (4.3 cm H x 22.2 cm W x 7.6 cm D) (Depth excludes connectors.) |
||
| Product weight | 0.8 lbs (0.4 kg) | ||
| Shipping weight | 2 lbs (1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply. |
||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Product warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.0-060811-D14) | |||
