我的位置：
爱思创Extron电子-用于 HDMI、音频和 RS-232 信号的双光纤发送器-PowerCage 401 FOX DT HD
厂家报价：面议
产品状态：(在产)
用于 HDMI、音频和 RS-232 信号的双光纤发送器 PowerCage 401 FOX DT HD
产品品牌：
爱思创EXTRON
产品类别：
产品中心
地址：中国上海市松江区茸华路 686 号
电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| PowerCage™ 401 FOX DT HD | |||
 Specification |
|||
|---|---|---|---|
 |
|||
| Frame rate 1 | 24, 25, 30, 50, or 60 fps | ||
| Chroma sampling 1 | 4:4:4 | ||
| Color bit depth 1 | 8 bits per color | ||
| Signal type | DVI 1.0, HDMI 1.4a, HDCP 1.4 | ||
| Max. video data rate | 4.95 Gbps per HDMI connection | ||
|
|||
|
|||
|
|||
|
|||
|
|||
| Optical fiber interconnection between transmitter and receiver | |||
| Number/type | 4 singlemode or 4 multimode fiber optic input and output per FOX board | ||
| Connectors | 4 bidirectional LC connectors per FOX board | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a SM board | ||
| Multimode | 300 m (984') with 62.5 µm OM1 multimode (MM) cable and a MM board 1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board 2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimizedMM cable and a MM board |
||
|
|||
| Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) | ||
| Transmission power, singlemode or multimode | -5 dBm, typical | ||
| Maximum receiver sensitivity | |||
| Singlemode | -18 dBm, typical | ||
| Multimode | -12 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 13 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Maximum channel data rate | 4.25 Gbps | ||
| Video | |||
|
|||
| Maximum data rate | 4.95 Gbps | ||
| Maximum pixel clock | 165 MHz | ||
| Color space | 4:4:4 | ||
| Horizontal frequency | 24 kHz to 135 kHz | ||
| Vertical frequency | 40 Hz to 120 Hz | ||
| Maximum resolution | 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p @ 50/59.94/60Hz, 1080i @ 25/30 HZ, 1080p @ 50/60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled | ||
| Formats | RGB and YCbCr digital video | ||
| EDID | Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables. | ||
| HDCP | Compliant with High-bandwidth (Digital Content Protection (HDCP) using DVI and HDMI standards). | ||
| Standards | DVI 1.0, HDMI 1.4a, HDCP 1.4, CEA-861E | ||
| Video input | |||
| Number/signal type | 2 single link HDMI | ||
| Connectors | 2 female 19-pin HDMI type A | ||
| Nominal level | 0.8 Vp-p | ||
| Audio | |||
|
|||
| Gain | |||
| Range | Adjustable, -18 dB to +10 dB | ||
| Default | Unbalanced output: -6 dB; balanced output: 0 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.10% @ 1 kHz at nominal level | ||
| S/N | >80 dB at maximum output (unweighted) | ||
| CMRR | 65 dB @ 20 Hz to 20 kHz | ||
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
| Sampling rate | 48 kHz | ||
| Audio input | |||
| Number/signal type | 2stereo, unbalanced or 4mono, unbalanced 2stereo, de-embedded from HDMI (2-ch, PCM only) |
||
| Connectors | (2) 3.5 mm mini stereo jack 2 female HDMI, type A |
||
| Impedance | >10k ohms unbalanced, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +8.9 dBV, unbalanced at 1% THD+N | ||
|
|||
| Audio output — See the receiver specifications | |||
| Communications — Serial pass-through port | |||
| Serial pass-through port | 2 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (through FOX DT HD) | ||
| Baud rates | 9600 to 115,200 baud | ||
| Pass-through pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
| Program control | Extron control/configuration program for Windows® (PCS) Extron Simple Instruction Set (SIS ™ ) Microsoft® Internet Explorer® ver 6.0 or higher, Telnet |
||
| General | |||
| Power supply | Supplied by PowerCage 401 enclosure. | ||
| Power consumption | 9.9 watts | ||
| Power input requirements | 12 VDC, 1.0 A, supplied by the PowerCage 401 enclosure | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, within the PowerCage 401 enclosure | ||
| Thermal dissipation | 33.8 BTU/hr | ||
| Dimensions | 1.60" H x 3.50" W x 8.00" D (4.1 cm H x 8.9 cm W x 20.3 cm D) (Fits a single slot opening in a PowerCage 401 enclosure.) |
||
| Product weight | 0.8 lbs (0.4 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, FDA Class 1, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
| Product warranty | 3 years parts and labor | ||
|
|||
|
|||
| (3795-111616-D4) | |||
