我的位置:
爱思创Extron电子-用于 HDMI、音频和 RS-232 信号的光纤图像解析度转换接收器-PowerCage FOX SR HDMI
厂家报价:面议
产品状态:(在产)
用于 HDMI、音频和 RS-232 信号的光纤图像解析度转换接收器 PowerCage FOX SR HDMI
产品品牌:
爱思创EXTRON
产品类别:
产品中心
地址:中国上海市松江区茸华路 686 号
电话:4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)
经销商 | 联系方式 | 价格 |
---|---|---|
爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
PowerCage™ FOX SR HDMI | |||
|
|||
|
|||
|
|||
Optical fiber interconnection between transmitter and receiver | |||
---|---|---|---|
Number/type | 1 singlemode or 1 multimode fiber optic input and output per FOX board | ||
|
|||
Connectors | 2 bidirectional LC connectors per FOX board | ||
Operating distance | |||
Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a SM board | ||
Multimode | 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board 1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board |
||
|
|||
Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) | ||
Transmission power, singlemode or multimode | -5 dBm, typical | ||
Maximum receiver sensitivity | |||
Singlemode | -18 dBm, typical | ||
Multimode | -12 dBm, typical | ||
Optical loss budget | |||
Singlemode | 13 dB, maximum | ||
Multimode | 7 dB, maximum | ||
Maximum channel data rate | 4.25 Gbps | ||
Video processing | |||
Digital sampling | 24 bit, 8 bits per color, 165 MHz standard | ||
Colors | 16.78 million | ||
Video output | |||
|
|||
Number/signal type | 1 single link HDMI (HDCP compliant) | ||
Connectors | 1 female HDMI type A | ||
Nominal level | 0.8 Vp-p | ||
Video delay | 1-2 frames | ||
Scaled resolution | 640x480 6,8,9 , 800x600 6,8,9 , 852x480 6,8,9 , 1024x768 6,8,9 , 1024x852 6,8,9 , 1024x1024 6,8,9 , 1280x768 6,8,9 , 1280x800 6,8,9 , 1280x1024 6,8,9 , 1360x765 6,8,9 , 1360x768 6,8,9 , 1365x768 6,8,9 , 1365x1024 6,8,9 , 1366x768 6,8,9 , 1400x1050 6,8 , 1440x900 6,8,9 , 1600x1200 6,8 , 1680x1050 6,8 , 1920x1200 6,8 HDTV: 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 2048x1080 1,2,3,4,5,6,7,8 |
||
1 = 23.98Hz, 2 = 24Hz, 3 = 25Hz, 4 = 29.97Hz, 5 = 30Hz, 6 =50Hz, 7 =59.94Hz, 8 =60Hz, 9 =75Hz | |||
Audio | |||
|
|||
Gain | |||
Range | Adjustable, -18 dB to +10 dB | ||
Default | Unbalanced output: -6 dB; balanced output: 0 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
THD + Noise | 0.10% @ 1 kHz at nominal level | ||
S/N | >80 dB at maximum output (unweighted) | ||
CMRR | 65 dB @ 20 Hz to 20 kHz | ||
Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
Sampling rate | 48 kHz | ||
Audio output | |||
Number/signal type | 1 stereo, balanced/unbalanced or 2 mono, balanced/unbalanced |
||
Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Nominal level | -10 dBV (316 mVrms) | ||
Maximum level (Hi-Z) | >+11.0 dBu, balanced at 1% THD+N | ||
Maximum level (600 ohm) | >+10.0 dBu, balanced at 1% THD+N | ||
Audio delay | 1.5 frames | ||
Control/remote | |||
Serial control ports | |||
Control | 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port) | ||
Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used, "RS-232 Over Fiber") | ||
Baud rate and protocol | |||
Control | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
Pass-through | 9600 to 115,200 baud | ||
Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) |
||
General | |||
Power | Supplied by a PowerCage 1600 enclosure | ||
Power consumption | 8.8 watts | ||
Power input requirements | 12 VDC, 1.0 A, supplied by the PowerCage enclosure | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Enclosure: fans, front to back Boards: convection, within the PowerCage enclosure |
||
Thermal dissipation | 29.8 BTU/hr | ||
Dimensions | Each board fits a double slot opening in a PowerCage enclosure. | ||
Product weight | 1.1 lbs (0.5 kg) | ||
Shipping weight | 2 lbs (1 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, FDA Class 1, UL | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
Product warranty | 3 years parts and labor | ||
|
|||
|
|||
(8.0-100312-D2) |