数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-长距离 HDMI 双绞线延长器-DTP HDMI 301

厂家报价:面议 产品状态:(停产)

长距离 HDMI 双绞线延长器 DTP HDMI 301

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
DTP HDMI 301 Tx/Rx
NOTE This product consists of a transmitter (DTP HDMI 301 Tx) and a receiver (DTP HDMI 301 Rx), sold separately, with twisted pair cables linking the transmitter and receiver.
NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Video
Maximum data rate 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock 165MHz
Resolution range Up to 1920x1200 or 1080p @ 60 Hz; 8, 10, or 12 bit color depth
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI
Video input — transmitter
Number/signal type 1 single link HDMI (or DVI-D*)
Connectors 1 female HDMI type A
Interconnection between transmitter and receiver
Connectors 2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver
TP1 output transmits digital video, embedded digital audio, RS-232, IR, and remote power.
TP2 output transmits analog stereo audio.
Termination standards TIA/EIA T568A or T568B
Signal transmission distance 330' (100 m) using CAT 5e/6/7 UTP or STP cable (24 AWG or better)
Video output — receiver
Number/signal type 1 single link HDMI (or DVI-D*)
Connectors 1 female HDMI type A
Audio
Gain Unbalanced output: 0 dB; balanced output +6 dB
Frequency response 20 Hz to 20 kHz, ±0.05 dB
THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output
S/N >90 dB, at maximum output (15 dBu), balanced (unweighted)
Stereo channel separation >80 dB @ 1 kHz to 20 kHz
Audio input
Number/signal type 1 PC level stereo, unbalanced
Connectors (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
Impedance >10k ohms, DC coupled
Nominal level -10 dBV (316 mVrms)
Maximum level +7 dBV (unbalanced)
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV≈ 2 dBu
Audio output
Number/signal type 1 stereo (2 channel), balanced/unbalanced
Connectors (1) 3.5 mm captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1 dB channel to channel
Maximum level (600 ohm) >+15 dBu, balanced
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output
Transmitter RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port)
Receiver 1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input
Transmitter 1 set of proprietary signals on a female RJ-45 jack
Receiver RS-232 via a 3.5 mm, 3 pole captive screw connector
Baud rates Up to 115200 baud
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND
IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared controlfrom 30 kHz up to 60 kHz
IR control pin configuration 3 = GND, 4 = IR Tx, 5 = IR Rx
General
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
Power consumption 7.0 watts, 12 VDC, total, for both transmitter and receiver
NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of thetwisted paircable.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount Yes, with optional 1U high rack shelf
Furniture mount Yes, with optional under-desk mounting kit
Enclosure type Metal
Enclosure dimensions
Transmitter 1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x7.6 cm D)
(Depth excludes connectors.)
Receiver 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight
Transmitter 0.5 lbs (0.3 kg)
Receiver 1.0 lb (0.5 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.0-053112-D6)
    null