| HDMI 201 Tx/Rx |
| NOTE |
This product consists of a transmitter (HDMI 201 Tx) and a receiver (HDMI 201 Rx) with twisted pair cables linking the transmitter and receiver. |
|
| NOTE |
*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
|
| Video |
| Maximum data rate |
4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock |
165 MHz |
| Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz |
| Formats |
RGB and YCbCr digital video |
| Standards |
DVI 1.0, HDMI |
|
| Video input — Tx units |
| Number/signal type |
1 single link HDMI (or DVI-D*) |
| Connectors |
1 female HDMI type A |
|
| Interconnection between transmitter and receiver |
| Connectors |
2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver |
| Termination standards |
TIA/EIA T568A or T568B |
| Signal transmission distance |
|
| 1920x1200 or 1080p @ 60 Hz |
| Extron STP201 cable |
Up to 150' (45 m) |
| CAT 5/5e/6 STP |
Up to 125' (38 m) |
| CAT 5/5e/6 UTP |
Up to 100' (30 m) |
| 720p/1080i or 1024x768 @ 60 Hz |
| CAT 5/5e/6 UTP or STP or Extron STP201 |
200' (60 m) |
| NOTE |
The transmission distance varies greatly depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
| NOTE |
Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. Extron strongly recommends using shielded twisted pair for optimal performance. |
|
|
| Video output — Rx units |
| Number/signal type |
1 single link HDMI (or DVI-D*) |
| Connectors |
1 female HDMI type A |
|
| Control/remote — external device (pass-through) |
| Serial control port input |
|
| Transmitter |
RS-232 via (1) 3.5 mm, 3 pole captive screw connector |
| Receiver |
1 set of proprietary signals on a female RJ-45 jack |
| Serial control port output |
|
| Transmitter |
1 set of proprietary signals on a female RJ-45 jack |
| Receiver |
RS-232 via a 3.5 mm, 3 pole captive screw connector |
| NOTE |
Protocol is mirrored between the transmitter and the receiver. |
|
| Serial control pin configuration |
Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND |
|
| General |
| Power supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
| Power consumption |
|
| HDMI 201 Tx |
2.2 watts, 12 VDC |
| HDMI 201 Rx |
4.0 watts, 12 VDC |
| NOTE |
Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the CAT 5/5e/6 or Extron STP201 cables. |
|
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
| Rack mount |
Yes, with optional 1U deep rack shelf |
| Furniture mount |
Yes, with optional under-desk mounting kit |
| Pole mount |
Yes, with optional pole mount kit |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| Product weight |
0.5 lbs (0.3 kg) |
| Shipping weight |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE**, C-tick, FCC Class A**, ICES, VCCI |
| NOTE |
**CE and FCC testing is conducted with STP (shielded twisted pair) cable. |
|
| Warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (8.0-021412-D17) |
