| PowerCage™ FOX 3G HD-SDI |
| NOTE |
The PowerCage FOX 3G HD-SDI board is available in singlemode or multimode version. |
|
| NOTE |
The PowerCage FOX 3G HD-SDI board isa class1 laser product. It meets the safety regulations of IEC-60825, FDA21 CFR1040.10, and FDA21 CFR1040.11. |
|
|
| Optical fiber interconnection between transmitter and receiver |
| Number/type |
1 singlemode or 1 multimode fiber optic input and output per FOX board |
| Connectors |
2 bidirectional LC connectors per FOX board |
| Operating distance |
|
| Singlemode |
30 km (18.75 miles) with singlemode (SM) cables with a SM board |
| Multimode |
300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board |
| NOTE |
Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength |
850 nm for multimode (MM), 1310 nm for singlemode (SM) |
| Transmission power, singlemode or multimode |
-5 dBm, typical |
| Maximum receiver sensitivity |
|
| Singlemode |
-18 dBm, typical |
| Multimode |
-12 dBm, typical |
| Optical loss budget |
|
| Singlemode |
13 dB, maximum |
| Multimode |
7 dB, maximum |
| Maximum channel data rate |
4.25 Gbps |
|
| Video |
| NOTE |
The PowerCage FOX 3G HD-SDI is a transceiver that can function as a transmitter or as a receiver. Two units are required for a transmitter-receiver system with one fiber optic cable linking the two units. |
|
| Signal type |
HD-SDI, SDI, and 3G-SDI digital video signals |
| Gain |
Unity |
| Resolution |
8 or 10 bits, automatic |
| Data rates |
270 Mbps, 1.485 Gbps, 2.970 Gbps |
| Operation standards |
SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120 |
| Auto data rate lock |
Yes |
|
| Video input — PowerCage FOX 3G HD-SDI transmitter |
| Number/signal type |
1 single link SDI, HD-SDI, or 3G-SDI digital component video |
| Connectors |
1 female BNC |
| Data rates |
19 Mbps to 2.97 Gbps |
| Nominal level |
0.8 Vp-p |
| Minimum/maximum levels |
0.5 V to 1 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
≥15 dB @ 5 MHz to 1.5 GHz
≥10 dB @ 1.5 GHz to 3 GHz |
| DC offset (max. allowable) |
5 V |
| Input coupling |
AC |
| Input cable equalization |
Automatic for up to -30 dB of cable loss |
| HD-SDI |
120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cable |
| SDI |
150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable |
| NOTE |
The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
| Video output — PowerCage FOX 3G HD-SDI receiver |
| Number/signal type |
2 single link SDI, HD-SDI, or 3G-SDI digital component video |
| Connectors |
2 female BNC |
| Re-clocking |
Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for unrecognized rates |
| Nominal level |
0.8 Vp-p |
| Minimum/maximum levels |
0.5 V to 1.0 Vp-p |
| Impedance |
75 ohms |
| Return loss |
>25 dB @ 100 MHz |
| DC offset |
±5 mV with input at 0 offset |
|
| Control/remote |
| Serial control port |
1 bidirectional RS-232, 2.5 mm captive screw connector |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configuration |
1 = Tx, 2 = Rx, 3 = GND |
| Program control |
Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS ™ ) |
|
| General |
| Power |
Supplied by a PowerCage 1600 enclosure |
| Power consumption |
1.84 watts |
| Power input requirements |
12 VDC, 1.0 A, supplied by the PowerCage enclosure |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosure |
| Thermal dissipation |
27.6 BTU/hr |
| Enclosure type |
Metal |
| Dimensions |
Each board fits a double slot opening in a PowerCage enclosure. |
| Product weight |
1.1 lbs (0.5 kg) |
| Shipping weight |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, FDA Class 1, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental |
Complies with the appropriate requirements of RoHS, WEEE. |
| Warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (8.0-012513-D2) |
