数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-用于 RGBHV、音频和 RS-232 信号的光纤接收器-FOX 500 Rx

厂家报价:面议 产品状态:(停产)

用于 RGBHV、音频和 RS-232 信号的光纤接收器 FOX 500 Rx

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
FOX 500 Rx
NOTE The FOX 500 Rx is a receiver with one or two fiber optic cables linking it to a transmitter.
NOTE The analog RGB input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog RGB in the receiver.
NOTE The analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
NOTE This receiver is a class 1 laser product. It meets the safety regulations of IEC-60825.
Optical fiber interconnection between transmitter and receiver
Number/type 1 or 2 fiber optic
NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control and communication.
Connectors 2 LC connectors
Operating distance
Singlemode 30 km (18.75 miles) with singlemode (SM) cables with an SM unit
Multimode 300 m (985') with 62.5µm OM1 multimode (MM) cableswith an MM unit
1 km (3280') with 50µm OM2 multimode (MM) cables with an MM unit
2 km (6561') with 50 µmOM3/OM4 laser optimized multimode cable with an MM unit
NOTE Operating distance is approximate.These are typical maximum distances thatmayvary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength 850 nm for MM units, 1310 nm for SM units
Data rate 4.25 Gbps
Transmission power -5 dBm, typical
Maximum receiver sensitivity
Singlemode -18 dBm, typical
Multimode -12 dBm, typical
Optical loss budget
Singlemode 13 dB, maximum
Multimode 7 dB, maximum
Video
Number/signal type VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, or HD component
Gain Unity
Pixel data bit depth 8 bits per channel, 3 channels (R, G, B)
Maximum resolution 1600x1200 or 1080p@ 60 Hz, digitized pixel for pixel; higher resolutions up to 2048x1120, undersampled
Video output
Number/signal type 2 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs (follows input or can be set by user)
Connectors 1 x 6 female BNC and (1) female 15-pin HD
Nominal level 0.7 Vp-p for RGB
Minimum/maximum levels 0.3 V to 1.5 Vp-p
Impedance 75 ohms
Return loss -40 dB @ 5 MHz
DC offset ±5 mV with input at 0 offset
Video delay 1-2 frames
Sync
Output type RGBHV, RGBS, RGsB, RsGsBs (follows input or can be set by user), or component video
Output level TTL: 5.0 Vp-p, unterminated, on HV, for RGBHV, RGBS
0.3 Vp-p for component video (bi-level sync, unterminated) or for Gs (SOG), terminated
0.6 Vp-p for component video (tri-level sync)
Output impedance 75 ohms
Polarity Positive or negative (follows input or can be set by user)
Audio
Gain
Range Adjustable, -18 dB to +10 dB
Default
Captive screw connector Unbalanced output: -6 dB; balanced output: 0 dB
Mini stereo jack Unbalanced output: 0 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.10% @ 1 kHz at nominal level
S/N >80 dB at maximum output (unweighted)
CMRR 65 dB @ 20 Hz to 20 kHz
Audio bits per sample 18 bits per channel, 2 channels (L, R)
Sampling rate 48 kHz
Audio output
Number/signal type 2 buffered outputs: 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono
Connectors (1) 3.5 mm captive screw connector, 5 pole
(1) 3.5 mm mini stereo jack
Impedance 50 ohms unbalanced, 100 ohms balanced
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level (Hi-Z) >+19 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm) >+15 dBm, unbalanced at 1% THD+N
Audio delay 1.5 frames
Control/remote
Serial control ports
Control 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)
1 RS-232, 2.5 mm mini stereo jack (front panel)
Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)
Baud rate and protocol
Control 9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through 9600 to 115,200 baud
Serial control pin configurations Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND
Program control Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS )
General
Power supply Internal
Input: 100-240 VAC, 50-60 Hz
Power consumption 10.9 watts
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vents on top and sides
Mounting
Rack mount Yes, with optional rack shelf kit
Furniture mount Yes, with optional under desk mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
(Depth excludes connectors and knobs.)
Product weight 2.3 lbs (1.0 kg) per unit, 4.6 lbs (2.1 kg) per pair
Shipping weight 4 lbs (2 kg) per unit, 8 lbs (4 kg) per pair
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-112514-D2)
    null