| PowerCage™ FOX II AEX 104 |
| NOTE |
The PowerCageFOXII AEX104 is not compatible with the Extron FOX3GHD-SDI extender or the FOX3GDVC signal converter. |
|
| NOTE |
Analog audio signals are digitized in a fiber optic transmitter, sent through the fiber cable to the matrix switcher, then the PowerCageFOX II AEX 104, and converted back to analog audio in the PowerCage FOX IIAEX 104 or the receiver. |
|
| NOTE |
These units are class 1 laser products. They meet the safety regulations of IEC-60825. |
|
|
| Optical fiber interconnection between transmitter or fiber matrix switcher and receiver |
| Number/type |
2 fibers per extraction point |
| Connectors |
8 LC connectors |
| Operating distance |
|
| Singlemode |
30 km (18.75 miles) with singlemode (SM) cables with a PowerCage FOX SM unit |
| Multimode |
300 m (984') with 62.5 µm OM1 multimode (MM) cables
1 km (3280') with 50 µm OM2 multimode (MM) cables
2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cables |
| NOTE |
Operating distance is approximate.These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength |
850 nm for MM, 1310 nm for SM |
| Data rate |
4.25 Gbps or 2.125 Gbps, selectable |
| Transmission power |
|
| Singlemode |
-5 dBm, typical |
| Multimode |
-5 dBm, typical |
| Maximum receiver sensitivity |
|
| Singlemode |
-18 dBm, typical |
| Multimode |
-12 dBm, typical |
| Optical loss budget |
|
| Singlemode |
13 dB, maximum |
| Multimode |
7 dB, maximum |
|
| Audio |
| Gain |
Unbalanced output: -6 dB
Balanced output: 0 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise |
0.10% @ 1 kHz at nominal level |
| S/N |
>80 dB at maximum output (unweighted) |
| Audio bits per sample |
18 bits per channel, 2 channels (L, R) |
| Sampling rate |
48 kHz |
|
| Audio input — See the transmitter specifications |
|
| Audio output |
| Number/signal type |
4 stereo, balanced/unbalanced or
8 mono, balanced/unbalanced |
| Connectors |
(4) 3.5 mm captive screw connectors, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Nominal level |
+4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level |
>+11 dBu, balanced at 1% THD+N |
| Audio delay |
1.5 frames |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| General |
| Power |
Supplied by a PowerCage 1600 System Enclosure |
| Power consumption |
10.8 watts |
| Power input requirements for boards |
12 VDC, 1.0 A, supplied by the PowerCage enclosure |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosure |
| Thermal dissipation |
37.1 BTU/hr |
| Enclosure type |
Metal |
| Enclosure dimensions |
|
| PowerCage enclosure |
5.25" H x 17.0" W x 12.25" D (3U high, full rack wide)
13.3 cm H x 43.2 cm W x 31.2 cm D
(Depth excludes connectors on the optional boards. Width excludes rack ears.) |
| PowerCage FOX II AEX boards |
Fits a double slot opening in a PowerCage enclosure |
| Product weight |
|
| PowerCage enclosure |
11.6 lbs (5.3 kg) |
| PowerCage FOX II AEX boards |
1.1 lbs (0.5 kg) |
| Shipping weight |
|
| PowerCage enclosure |
13 lbs (6 kg) |
| PowerCage FOX II AEX boards |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (8.1-070815-D5) |
