| FOX AEX 108 |
| NOTE |
Analog audio signals are digitized in a fiber optic transmitter, sent through the fiber cable to the matrix switcher, then the FOXAEX108, and converted back to analog audio in the FOXAEX108 or the receiver. |
|
| NOTE |
These units are class 1 laser products. They meet the safety regulations of IEC-60825. |
|
| NOTE |
The FOXAEX108 is not compatible with the Extron FOX3GHD-SDI extender or the FOX3GDVC signal converter. |
|
|
| Optical fiber interconnection between transmitter or fiber matrix switcher and receiver |
| Number/type |
2 fibers per extraction point |
| Connectors |
16 LC connectors |
| Operating distance |
|
| Singlemode |
30 km (18.75 miles) with singlemode (SM) cables |
| Multimode |
300 m (984') with 62.5µm OM1 multimode (MM) cables
1 km (3280') with 50µm OM2 multimode (MM) cables
2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cables |
| NOTE |
Operating distance is approximate.These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength |
850 nm for MM, 1310 nm for SM |
| Data rate |
4.25 Gbps or 2.125 Gbps, selectable |
| Transmission power |
|
| Singlemode |
-5 dBm, typical |
| Multimode |
-5 dBm, typical |
| Maximum receiver sensitivity |
|
| Singlemode |
-18 dBm, typical |
| Multimode |
-12 dBm, typical |
| Optical loss budget |
|
| Singlemode |
13 dB, maximum |
| Multimode |
7 dB, maximum |
|
| Audio |
| Gain |
|
| Default |
Unbalanced output: –6 dB
Balanced output: 0 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise |
0.10% @ 1 kHz at nominal level |
| S/N |
>80 dB at maximum output (unweighted) |
| Audio bits per sample |
18 bits per channel, 2 channels (L, R) |
| Sampling rate |
48 kHz |
|
| Audio input — See the transmitter specifications |
|
| Audio output |
| Number/signal type |
8 balanced/unbalanced stereo, 16 balanced or unbalanced mono |
| Connectors |
(8) 3.5 mm captive screw connectors, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Nominal level |
+4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level |
>+11 dBu, balanced at 1% THD+N |
| Audio delay |
1.5 frames |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| General |
| Power supply |
Internal
100 VAC to 240 VAC, 50-60 Hz, 20.0 watts |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, vents on top and side panels |
| Thermal dissipation |
47.2 BTU/hr |
| Mounting |
|
| Rack mount |
Yes, with optional rack shelf |
| Furniture mount |
Yes, with optional under desk mounting kit |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 8.7" W x 6.0" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.) |
| Product weight |
2.3 lbs (1.0 kg) |
| Shipping weight |
4lbs (3 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (8.1-070815-D6) |
