数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-带 RS-232 和红外插入的 XTP 4K 发送器和接收器板-XTP CP 4K 输入/输出板

厂家报价:面议 产品状态:(在产)

带 RS-232 和红外插入的 XTP 4K 发送器和接收器板 XTP CP 4K 输入/输出板

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
XTP CP 4K I/O Boards

Specifications
Frame rate 1 24, 25, 30, 50, or 60 fps
Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0
Color bit depth 1 8 bits per color
Signal type 1 Refer to XTP endpoints
Max. video data rate 1 10.2 Gbps (3.4 Gbps per color)
NOTE 1 Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this rate.
Video — XTP CP 4i 4K, XTP CP 4o 4K
Gain Unity
Resolution range Up to 2560x1600 @ 60 Hz* or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 with 4:2:0 chroma subsampling
* reduced blanking
Signal type Single-link HDMI (or DVI-D or DisplayPort)
Maximum data rate 10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock 300 MHz
Video formats RGB and YCbCr digital video
Standards Refer to XTP endpoints
Switching speed 200 ms (max.)
Audio format Analog stereo, Dolby® Digital® Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos™ , DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™ , up to 8ch PCM,
Shielded twisted pair interconnection
Number/signal type 4 sets of proprietary signals
Connectors 4 female RJ-45 per board
Termination standard TIA/EIA T568B
Signal transmission distance 330' (100 m) using shielded twisted pair or XTP DTP 24 cable
NOTE Lower resolutions may support longer transmission distances. Transmission distance varies depending on the signal resolution, type of cable, and source device used in the system.
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Communications — external device (pass-through, unidirectional or bidirectional)
Serial control pass-through ports RS-232 (±5 V)via (4) 3.5 mm, 5-pole captive screw connectors (uses 3 poles)
(connector is shared with IR control ports)
Baud rates 300 to 115200 baud
Protocol 5 to 8 data bits
1 or 2 stop bits
no parity (default), even or odd parity
flow control Xon, Xoff, and none
Serial control pin configuration 1 = Tx, 2 = Rx, 3 GND
IR control ports (4) 3.5 mm. 5-pole captive screw connectors (uses 3 poles)
(connector is shared with RS-232 control ports)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz
IR control pin configuration 3 = GND, 4 = IR Tx, 5 = IR Rx
Ethernet pass-through ports 4 female RJ-45
Ethernet data rate 10/100Base-T, half/full duplex with autodetect
General
Power Supplied by XTP CrossPoint or XTP II CrossPoint enclosure
Power consumption
XTP CP 4i 4K
PoE 79 watts (XTP CrossPoint 1600, XTP CrossPoint 3200, XTP II CrossPoint 1600, and XTP II CrossPoint 3200)
95 watts (XTP II CrossPoint 6400)
No PoE 35 watts
XTP CP 4o 4K
PoE 75 watts (XTP CrossPoint 1600, XTP CrossPoint 3200, XTP II CrossPoint 1600, and XTP II CrossPoint 3200)
90 watts (XTP II CrossPoint 6400)
No PoE 21 watts
Product weight 2.0 lbs (0.9 kg)
Regulatory compliance
Environmental Complies with the appropriate requirements ofRoHS, WEEE.
Product warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4563-D6)
    null