我的位置：
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| XTP CrossPoint® CP I/O Boards | |||
| Video — XTP CP 4i, XTP CP 4o | |||
|---|---|---|---|
| Gain | Unity | ||
| Resolution range | Up to 1920x1200*, 2K, or 1080p @ 60 Hz *reduced blanking |
||
| Signal type | Single-link HDMI (or DVI-D*) | ||
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI [if using an optional adapter] and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz) or 2K | ||
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. | ||
| HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards | ||
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. | ||
| Maximum pixel clock | 165 MHz | ||
| Standards | DVI 1.0, HDMI 1.3, HDCP 1.1 | ||
| Switching speed | 200 ns (max.) | ||
| Video format | HDMI and DVI | ||
| Audio format | Analog stereo, Dolby® Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio ™ , up to 8ch PCM, Dolby Atmos | ||
| Shielded twisted pair interconnection | |||
| Number/signal type | 4 sets of proprietary signals | ||
| Connectors | 4 female RJ-45 per board | ||
| Signal termination standards | TIA/EIA T568B | ||
| Input cable length | Up to 330" (100 m) using shielded twisted pair or XTP DTP 24 cable | ||
|
|||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
| Control/remote — external device (pass-through) | |||
| Serial control pass-through ports | 4 RS-232, via 3.5 mm, 5-pole captive screw connectors (shared with IR ports) | ||
| Baud rates | 300 to 115200 baud | ||
| Protocol | 5 to 8 data bits 1 or 2 stop bits no parity (default), even or odd parity flow control Xon, Xoff, and none |
||
| Serial control pin configuration | 1= Tx,2 = Rx,3 = GND | ||
| Ethernet pass-through ports | 4female RJ-45 | ||
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
| IR control ports | 4, via 3.5 mm, 5-pole captive screw connectors (shared withRS-232 ports) | ||
| IR control pin configuration | 3= GND,4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power | Supplied by XTP CrossPoint or XTP II CrossPoint enclosure | ||
| Power consumption | |||
| XTP CP 4i | |||
| PoE | 79 watts (XTP II CrossPoint 3200) 95 watts (XTP II CrossPoint 6400) |
||
| No PoE | 35 watts | ||
| XTP CP 4o | |||
| PoE | 75 watts (XTP II CrossPoint 3200) 90 watts (XTP II CrossPoint 6400) |
||
| No PoE | 21 watts | ||
| Product weight | 2.0 lbs (0.9 kg) | ||
| Regulatory compliance | |||
| Environmental | Complies with the appropriate requirements ofRoHS, WEEE. | ||
| Product warranty | 3 years parts and labor | ||
|
|||
|
|||
| (4058-D4) | |||
