| XPA 2002-70V, XPA 2002-100V |
|
| Audio |
| Voltage gain |
|
| XPA 2002-70V |
57x (35 dB) |
| XPA 2002-100V |
81x (38 dB) |
| Crosstalk |
75 dB (typical) @ 1 kHz |
| CMRR |
75 dB (typical) @ 1 kHz |
|
| Audio input |
| Number/signal type |
2 balanced/unbalanced |
| Connectors |
(2) 3.5 mm captive screw connectors, 3 pole |
| Impedance |
>10k ohms unbalanced/balanced, DC coupled |
| Nominal level |
+4 dBu (1.23 Vrms), balanced |
| Maximum level |
+21 dBu (8.69 Vrms), balanced |
| Input sensitivity |
+4 dBu (1.23 Vrms) |
| Input signal detection threshold |
-40 dBu ±3 dB, balanced |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
| Number/signal type |
|
| XPA 2002-70V |
2channels 70 V |
| XPA 2002-100V |
2 channels, 100 V |
| Connectors |
(2) 5 mm screw lock captive screw connectors, 2 pole |
| NOTE |
These connectors accept wires of 22 AWG to 12 AWG. |
|
| Load impedance |
|
| XPA 2002-70V |
25 ohms minimum |
| XPA 2002-100V |
50 ohms minimum |
| Amplifier type |
Class D |
| Output power |
| XPA 2002-70V |
200 watts rms per channel, 70 V, 1 kHz, 0.1% THD |
| XPA 2002-100V |
200 watts rms per channel, 100 V, 1 kHz, 0.1% THD |
| Frequency response |
20 Hz to 20 kHz, ±1 dB |
| THD + Noise |
0.1%, 1kHz, 3dB below clipping |
| S/N |
100 dB, 20 Hz - 20 kHz, unweighted |
| Damping factor |
|
| XPA 2002-70V |
>100 @ 25 ohms |
| XPA 2002-100V |
>100 @ 50 ohms |
| High pass filter |
|
| XPA 2002-70V |
80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable) |
| XPA 2002-100V |
80 Hz, 12 dB per octave rolloff for 100 V line output (switch selectable) |
|
| Control/remote — amplifier |
| Control port |
(1) 3.5 mm captive screw connector,2 pole |
| Pin configurations |
|
| Standby power control (contact closure) |
Pin 1 = Gnd, pin 2 = standby |
|
| General |
| Power |
Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption and thermal dissipation |
|
XPA 2002-70V
|
115 VAC, 60Hz |
230 VAC, 50Hz |
| AC Line Current |
AC Power Consumed |
Thermal Dissipation |
AC Line Current |
AC Power Consumed |
Thermal Dissipation |
| Condition |
A |
W |
W |
BTU/hr |
A |
W |
W |
BTU/hr |
| Active (1/8 power), all channels driven |
70 V |
0.8 |
84.5 |
34.5 |
118 |
0.4 |
85.6 |
35.6 |
122 |
|
|
|
|
|
| Quiescent (idle) |
0.2 |
20.8 |
20.8 |
71 |
0.2 |
23.1 |
23.1 |
79 |
| Standby |
<0.1 |
<1 |
<1 |
<3 |
<0.1 |
<1 |
<1 |
<3 |
|
XPA 2002-100V
|
115 VAC, 60Hz |
230 VAC, 50Hz |
| AC Line Current |
AC Power Consumed |
Thermal Dissipation |
AC Line Current |
AC Power Consumed |
Thermal Dissipation |
| Condition |
A |
W |
W |
BTU/hr |
A |
W |
W |
BTU/hr |
| Active (1/8 power), all channels driven |
100 V |
0.8 |
89.6 |
39.6 |
135 |
0.4 |
90.4 |
40.4 |
138 |
|
|
|
|
|
| Quiescent (idle) |
0.2 |
25.1 |
25.1 |
86 |
0.2 |
26.2 |
26.2 |
89 |
| Standby |
<0.1 |
<1 |
<1 |
<3 |
<0.1 |
<1 |
<1 |
<3 |
|
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents, with heat sinks on the sides |
| Protection |
Clip limiting, thermal, short circuit, DC output |
| Indication |
Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit |
| Mounting |
|
| Rack mount |
Yes, with included mounting brackets |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 17.4" W* x 12.0" D (1U high, full rack wide)
(4.3 cm H x44.2 cm W* x30.5 cm D)
*Width excludes rack ears.19.0" (48.3 cm) W with rack ears. |
| Product weight |
9.2lbs (4.2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
BSMI, CCC, CE, c-UL, GS, KC, PSE, S-Mark, UL
Meets UL 60065, IEC60065, and BSEN60065 for AV equipment. |
| EMI/EMC |
CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, VCCI Class B |
| Environmental |
Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE |
| Product warranty |
3 years parts and labor |
| Everlast power supply warranty |
7 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (081717-D17) |
