数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-支持 Dante 的 70 V 单声道音频功率放大器 – 100 W-NetPA 1001-70V AT

厂家报价:面议 产品状态:(在产)

支持 Dante 的 70 V 单声道音频功率放大器 – 100 W NetPA 1001-70V AT

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

NetPA Series
Audio
Crosstalk >75 dB @ 1 kHz
Audio input
Number/signal type
NetPA 502 AT 1 stereo or 2 mono
NetPA 1001-70V AT 1 mono
Connectors 1 RJ-45
Maximum level 0 dBFS (digital)
Audio processing
D/A conversion 24 bit, selectable sampling rate
AT ports — audio transport
Transmission Dante/AES-67, software selectable
Connector 1 RJ-45 connector, 1-port 100 Mbps to Dante interface
Inputs
NetPA 502 AT 2 channels Rx
NetPA 1001-70V AT 1 channel Rx
Audio format 24-bit uncompressed, selectable at 44.1,48, 88.2, and 96kHz sampling rate
Latency Deterministic, based on user selection: 2.0 ms (default), 5.0 ms
Audio line output
Number/signal type
NetPA 502 AT 2 channels, balanced/unbalanced
NetPA 1001-70V AT 1 channel, balanced/unbalanced
Connectors
NetPA 502 AT (1) 3.5 mm captive screw connector,6 pole
NetPA 1001-70V AT (1) 3.5 mm captive screw connector,3 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Maximum level (at 0 dBFS digital input) >+15 dBu balanced; +9 dBu unbalanced
Frequency response 20 Hz to 20 kHz, ±1 dB
THD + Noise 0.03% @ 1 kHz at nominal level,
0.3% @ 20 kHz at nominal level
S/N >90 dB, at maximum output (unweighted)
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio speaker output
Number/signal type
NetPA 502 AT 2 channels, 4 or 8 ohms
NetPA 1001-70V AT 1 channel, 70 V
Connectors
NetPA 502 AT (1) 5.08 mm screw lock captive screw connector, 4 pole
NetPA 1001-70V AT (1) 5.08 mm screw lock captive screw connector, 2 pole
NOTE These connectors accept wires of 22 AWG to 12 AWG.
Load impedance
NetPA 502 AT 4 ohms minimum
NetPA 1001-70V AT 50 ohms minimum
Amplifier type Class D
Output power
NetPA 502 AT 50 watts rms per channel, 4 ohms, 1 kHz, 0.1% THD
25 watts rms per channel, 8 ohms, 1 kHz, 0.1% THD
NetPA 1001-70V AT 100 watts rms, 70 V, 1 kHz, 0.1% THD
Frequency response
NetPA 502 AT 20 Hz to 20 kHz, +1/-3 dB @ 1 watt
NetPA 1001-70V AT 20 Hz to 20 kHz, +1/-3 dB @ 1 watt
THD + Noise <0.1% @ 1 kHz, 3 dB below clipping
S/N >90 dB, 20 Hz - 20 kHz, unweighted
High pass filter
NetPA 1001-70V AT 80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
Communications — amplifier
Control port (1) 3.5 mm captive screw connector,2 pole
Pin configurations
Standby power control (contact closure) Pin1 = standby, pin2 = Gnd
General
Power supply Internal
Input: 100-240 VAC, 50-60 Hz, 0.5 A
Power consumption and thermal dissipation
NetPA 502 AT
115 VAC, 60Hz 230 VAC, 50Hz
AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all channels driven 0.3 14.6 8.3 28 0.2 17 10.7 36
0.4 22.3 9.8 33 0.3 24 11.7 40
Quiescent (idle) 0.1 7.4 7.4 25 0.1 9.9 9.9 34
Standby <0.1 <2 <2 <6 <0.1 <2 <2 <6
NetPA 1001-70V AT
115 VAC, 60Hz 230 VAC, 50Hz
AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all channels driven 70 V 0.4 22.7 10.2 35 0.3 24.1 11.6 39
Quiescent (idle) 0.1 7.6 7.6 26 0.1 9.2 9.2 31
Standby <0.1 <2 <2 <6 <0.1 <2 <2 <6
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents, with internal heat sink
Protection Clip limiting, thermal, short circuit, DC output
Indication Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or short circuit
Mounting
Rack mount Yes, with optional 1U rack shelf
Furniture mount Yes, with optional under-desk mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
Product weight
NetPA 502 AT 2.6 lbs (1.2 kg)
NetPA 1001-70V AT 2.6 lbs (1.2 kg)
Regulatory compliance BSEN 60065, CE, C-tick,c-UL, EN 55103-1, EN 55103-2, ENERGY STAR®,
FCC Class B, ICES, IEC 60065,RoHS,UL, UL 60065,VCCI Class B, WEEE.
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4536-D8)
    null