| MTP AV Series |
|
| Video |
| Gain |
Unity |
| Differential phase error |
<1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error |
<1.0% at 3.58 MHz and 4.43 MHz |
|
| Video input |
| Number/signal type |
|
| MTP T AV Series |
1 composite video |
| MTP T SV Series |
1 S-video |
| MTP R AV/SV Series |
1 set of proprietary analog signals |
| Connectors |
|
| MTP T AV Series |
1 female BNC |
| MTP T AV AAP |
1 female RCA |
| MTP T SV Series |
1 female 4-pin mini DIN |
| MTP R AV/SV Series |
1 female RJ-45 |
| Nominal level |
1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-30 dB, DC @ 10 MHz |
| DC offset (max. allowable) |
100 mV |
|
| Video output |
| Number/signal type |
|
| MTP T AV/SV Series, MTP T AAP Series |
1 set of proprietary analog signals |
| MTP R AV Series |
1 composite video |
| MTP R SV Series |
1 S-video |
| Connectors |
|
| MTP T AV/SV Series |
1 female RJ-45 |
| MTP T AAP Series |
1 female RJ-45 on a 3" (7.6 cm) pigtail |
| MTP R AV Series |
1 female BNC |
| MTP R SV Series |
1 female 4-pin mini DIN |
| Nominal level |
1 V p-p for Y of S-video and for composite video
0.3 V p-p for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.5 Vp-p |
| Impedance |
75 ohms |
| Return loss |
<-35 dB @ 5 MHz |
| DC offset |
±20mV with input at 0 offset |
|
| Sync |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Audio |
| Gain |
|
| RCA models |
Unbalanced output: 0 dB (unity) |
| All other models |
Unbalanced output: 0 dB (unity); balanced output: +6 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.25 dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N |
|
| RCA models |
>90 dB, at maximum output (unweighted) |
| All other models w/audio |
>90 dB, balanced at maximum output (unweighted) |
| Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>75 dB @ 1 kHz |
| CMRR |
>34 dB @ 20 Hz to 20 kHz |
|
| Audio input |
| Number/signal type |
|
| MTP T AV, MTP T SV A |
1 stereo, balanced/unbalanced |
| MTP T AV/SV A RCA, MTP T AAP, MTP T 45 Series |
1 stereo, unbalanced |
| MTP R Series |
1 set of proprietary analog signals |
| Connectors |
|
| MTP T AV, MTP T SV A |
(1) 3.5 mm captive screw connector, 5 pole |
| MTP T AV/SV A RCA, MTP T AAP |
1 pair of female RCA |
| MTP R Series |
1 female RJ-45 (shielded) |
| Impedance |
>5.6k ohms±5% unbalanced, >10k ohms ±5% balanced |
| Nominal level |
-10 dBV (0.32 Vrms) |
| Maximum level |
>+2.4 dBu (balanced or unbalanced) at 1%THD+N |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
| Number/signal type |
|
| MTP T Series |
1 set of proprietary analog signals(all MTP T models) |
| MTP R AV, MTP R SV A |
1 stereo or dual mono, balanced/unbalanced |
| MTP R AV/SV A RCA |
1 stereo or dual mono, unbalanced |
| Connectors |
|
| MTP T Series |
1 female RJ-45 (shielded) |
| MTP T AAP Series |
1 female RJ-45 on a 3" (7.6 cm) pigtail |
| MTP R AV, MTP R SV A |
(1) 3.5 mm captive screw connector, 5 pole |
| MTP R AV/SV A RCA |
1 pair of female RCA |
| Impedance |
|
| MTP R AV, MTP R SV A |
50 ohms unbalanced, 100 ohms balanced |
| MTP R AV/SV A RCA |
50 ohms unbalanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
>+3.3 dBu, balanced or unbalanced at 1%THD+N |
| Maximum level (600 ohm) |
>+2.0 dBm, balanced or unbalanced at 1%THD+N |
|
| General |
| Recommended cable type |
CAT5/5e/6 (shielded or unshielded) |
| External power supply |
100 VAC to 240 VAC, 50-Hz, external; to 12 VDC, 1.0 A, regulated |
| Power input requirements |
12 VDC, 0.2 A |
| NOTE |
If the distance between the transmitter and receiver is less than 200' (61 m) and if the internal jumper is in setting 2, you can connect a power supply to only one device in a transmitter/receiver pair. If the distance between transmitter and receiver is greater than 200' (61 m) or if the internal jumper is in setting 1 (default), connect a power supply to each device. |
|
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
|
| Rack mount |
|
| MTP T AAP Series |
Yes, with optional rack panel |
| All other models |
Yes, with optional 1U rack shelf |
| Furniture or wall mount |
|
| MTP T AAP Series |
Yes, with optional AAP mounting plates |
| All other models |
Yes, with optional brackets. |
| Enclosure type |
Metal |
| Enclosure dimensions (Depths exclude connectors and cables.) |
| MTP T AAP Series |
|
| Faceplate |
1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space AAP plate) |
| Transmitter |
1.35" H x 2.7" W x 1.3" D (3.4 cm H x 6.9 cm W x 3.3 cm D) |
| All other models |
1.7" H x 2.2" W x 3.0" D (1U high, one-eighth rack wide)
(4.2 cm H x 5.6 cm W x 7.6 cm D) |
| Product weight |
1.0 lbs (0.5 kg) |
| Shipping weight |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty |
3 years parts and labor |
| Everlast power supply warranty |
7 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (8.0-061112-D23) |
