我的位置：
爱思创Extron电子-带贯通的微型双绞线 RGBHV 和音频接收器-MTP RL 15HD A & MTP RL 15HD A SEQ
厂家报价：面议
产品状态：(停产)
带贯通的微型双绞线 RGBHV 和音频接收器 MTP RL 15HD A & MTP RL 15HD A SEQ
产品品牌：
爱思创EXTRON
产品类别：
产品中心
地址：中国上海市松江区茸华路 686 号
电话：4000.398766、 021-3760 1568(联系就说在DAV音视工程网上看到的)
| 经销商 | 联系方式 | 价格 |
|---|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 | 面议 |
| MTP 15HD A Series | |||
| Video | |||
|---|---|---|---|
| Gain | Unity | ||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | |||
| MTP R 15HD RSA D | 1 female RJ-45 on a pigtail | ||
| All other models | 1 female RJ-45 | ||
| Video input and loop through — transmitters | |||
| Number/signal type | |||
| MTP T 15HD A | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
||
| MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video | ||
| Connectors | |||
| MTP T 15HD A | 2 female 15-pin HD | ||
| All other transmitters | 1 female 15-pin HD | ||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 130 kHz | ||
| Vertical frequency | 30 Hz to 150 Hz | ||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset (max. allowable) | 250 mV | ||
| Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D) | |||
| Number/signal type | |||
| MTP R 15HD RSA D | 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video | ||
| All other receivers | 1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video |
||
| Connectors | |||
| MTP R 15HD RSA D | 1 female 15-pin HD | ||
| All other receivers | 1 female RJ-45 1 female 15-pin HD |
||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p | ||
| Impedance | 75 ohms | ||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset | |||
| MTP R 15HD RSA D | <±20 mV with input at 0 offset | ||
| All other receivers | <±35 mV with input at 0 offset | ||
| Skew compensation | 62 ns | ||
| Maximum resolution | Up to 1920x1200 or 2048x1080 or 1080p at 300' Up to 1024x768 at 600' |
||
|
|||
| Sync | |||
| Input type (transmitters) | RGBHV, RGBS, RGsB, RsGsBs | ||
| Output type (receivers) | RGBHV, RGBS, RGsB, RsGsBs | ||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Input level (transmitter) | 3.5 V to 5.5 Vp-p, unterminated | ||
| Output level (receivers) | 4.0 V to 5.0 Vp-p, unterminated | ||
| Input impedance (transmitter) | 573 ohms ±5% | ||
| Output impedance (receivers) | 110 ohms | ||
| Max. input voltage (transmitter) | 5.5 V p-p | ||
| Polarity | |||
| Transmitter | Positive or negative (follows input polarity) | ||
| Receivers | Positive or negative (switch-selectable) | ||
| Audio — all models | |||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | 1 female RJ-45 | ||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | >70 dB at maximum output (unweighted) | ||
| Stereo channel separation | >60 dB @ 1 kHz | ||
| CMRR | >43 dB @ 20 Hz to 20 kHz | ||
| Audio input — transmitters | |||
| Number/signal type | 1 stereo, unbalanced | ||
| Connectors | (1) 3.5 mm mini stereo jack | ||
| Impedance | >10k ohms, unbalanced | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | +18 dBu, (unbalanced) at 1%THD+N | ||
|
|||
| Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output | |||
| Number/signal type | 1 stereo, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+23 dBu, balanced or unbalanced at 1% THD+N | ||
| Maximum level (600 ohm) | >+17 dBm, balanced or unbalanced at 1% THD+N | ||
| Audio output — receivers | |||
| Number/signal type | |||
| MTP R 15HD RSA D | 1 mono, balanced/unbalanced | ||
| All other receivers | 2 mono, balanced/unbalanced | ||
| Connectors | |||
| MTP R 15HD RSA D | (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles) | ||
| All other receivers | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±1 dB channel to channel | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | |||
| MTP R 15HD RSA D | 14 dBm, unbalanced at 1% THD+N | ||
| All other receivers | +18 dBu, unbalanced at 1% THD+N | ||
| Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only | |||
| Serial control port input/output | 1 set of proprietary signals on a female RJ-45 jack | ||
| Serial control port output/input | RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole | ||
| Baud rates | Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.) | ||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
|
|||
| Serial control pin configuration | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND | ||
| General | |||
| Recommended cable type | CAT 5/5e/6 (shielded or unshielded) | ||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
||
| Power input requirements | 12 VDC, 0.5 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Rack mount | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional rack shelf | ||
| Furniture or wall mount | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional under-desk mounting kit | ||
| MTP T 15HD A AAP | Yes, with optional AAP mounting faceplates that have double space high AAP opening | ||
| MTP T 15HD A D, MTP R 15HD RSA D | Yes, in a decorator-style opening with a standard electrical wall box orstandard 1-gang USsize mud ring | ||
| MTP T 15HD A WM | Yes, in a 1-gang opening | ||
| Pole mount | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional pole mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) 4.3 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.) |
||
| Faceplates | |||
| MTP T 15HD A AAP | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) |
||
| MTP T 15HD A D, MTP R 15HD RSA D | 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.) *Overall height is 4.1" (10.4 cm) including mounting tabs. |
||
| MTP T 15HD A WM | 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) | ||
| Device | |||
| MTP R 15HD RSA D | 2.75" H x 1.65" W x 1.3" D (7.0 cm H x 4.2 cm W x 3.3 cm D) (Depth excludes connectors.) |
||
| Other AAP, D, and WM models | 2.7" H x 1.4" W x 1.4" D (6.9 cm H x 3.6 cm W x 3.6 cm D) (Depth excludes connectors.) |
||
| Product weight | 0.4 lbs (0.2 kg) | ||
| Regulatory compliance | CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4327-D18) | |||
