数字音视工程网

微信公众号

数字音视工程网

手机DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

爱思创Extron电子-通用型 VGA 发送器-XTP T VGA

厂家报价:面议 产品状态:(在产)

通用型 VGA 发送器 XTP T VGA

产品品牌: 爱思创EXTRON
产品类别: 产品中心
咨询 加入收藏 我要评价
咨询
所在单位:*
姓名:*
手机:*
职位:
邮箱:*
其他联系方式:
咨询内容:
验证码:
不能为空 验证码错误
确定
爱思创电子(上海)有限公司_爱思创Extron中国

厂商介绍: 爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、分配放大器、音频放大器、扬声器、双绞线和光纤设备、视频图像解析度转换器、视音频信号处理器、视音频流媒... [详细]

经销商 联系方式 价格
爱思创Extron电子 4000.398766、 021-3760 1568 面议
XTP T VGA
NOTE The XTP TVGA transmitter and XTP R HDMI receiver can be used together, with twisted pair cables linking the transmitter and receiver, or with other Extron XTP products.
Video
Gain Unity
Resolution range Up to 1920x1200 or 1080p (HDTV)
Maximum pixel clock 165 MHz
Formats RGB, component video, S-video, composite video
Video input and loop-through
Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video (YUVi or YUVp/HDTV), S-video, or composite video input
1 buffered RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video (YUVi or YUVp/HDTV), S-video, or composite video loop-through
Connectors 2 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels Analog: 0.3 V to 1.45 Vp-p with no offset
Impedance 75 ohms
Horizontal frequency 30 kHz to 100 kHz
Vertical frequency 24 Hz to 120 Hz
Interconnection between transmitter and receiver
Connectors 1 female RJ-45 per unit
Termination standards TIA/EIA T568B
Signal transmission distance 330' (100 m) using shielded twisted pair or XTP DTP 24 cable
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth, STP (Shielded Twisted Pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is stongly recommended for optimal performance.
Audio
Gain Unbalanced output: 0 dB; balanced output: +6
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise <0.1%, 20 Hz - 20 kHz at nominal level
S/N >90 dB, at maximum balanced output (unweighted)
Crosstalk ≤-80 dB @ 1kHz, fully loaded
Stereo channel separation >80 dB @ 1 kHz
Audio input
Number/signal type 1 analog stereo, balanced/unbalanced or
1 analog stereo, unbalanced
Connectors (1) 3.5 mm captive screw connector, 5 pole
1 female 3.5 mm mini stereo jack
Impedance 10k ohms unbalanced, 20k ohms balanced
Nominal level +4 dBu balanced, -10 dBV configurable
Maximum level +7 dBv unbalanced
Input gain adjustment -18 dB to +24 dB, 1 dB steps, adjustable
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV≈ 2 dBu
Communications — transmitter
USB control ports 1 front panel female mini USB B
USB standards USB 2.0, low speed
Program control Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS )
Communications — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output 1 set of proprieraey signals on a female RJ-45 jack
Serial control port output/input RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
Baud rates Up to 115200 baud
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND
Ethernet pass-through port 1 female RJ-45 connector
Ethernet data rate 10/100Base-T, half/full duplex with autodetect
IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz
IR control pin configuration 3 = GND, 4 = IR Tx, 5 = IR Rx
General
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
Power consumption
Device 11.5 watts, 12 VDC
Device and power supply 14.2 watts, 12 VDC
NOTE Each XTP transmitter or receiver can be powered either locally by an external power supply or remotely using an optional power inserter.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vents on sides and top
Thermal dissipation
Device 38.9 BTU/hr
Device and power supply 48.1 BTU/hr
Mounting
Rack mount Yes, with optional 1U high rack shelf
Furniture mount Yes, with optional under-desk mounting kit
Enclosure type Metal
Enclosure dimensions 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight 1.2 lbs (0.5 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance CE**, c-UL, UL, C-tick, FCC Class A**, ICES, VCCI
Complies with the appropriate requirements of RoHS and WEEE.
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4454-D12)
    null