我的位置：
巴可BARCO-UsingBarco’srenownedPulseelectronicandsoftwareplatform,Bragiispoweredbyare-Bragi projector
厂家报价：面议
产品状态：(在产)
TheaterSeries4KUHDResolution(3,840x2,160)SolidStateRGBLEDUpto2,600ANSILumens
产品品牌：
巴可BARCO
产品类别：
工程投影机
地址：北京市朝阳区太阳宫中路12号冠城大厦12层
电话：400-000-9370、400-882-2726、010-80101166(联系就说在DAV音视工程网上看到的)
| 投影机类型 | Single chip DLP |
| 技术 | 0.9" DMD™ |
| 分辨率 | 3,840 x 2,160 (4K UHD) |
| 宽高比 | 1.78:1 |
| 光源 | Solid State RGB LED |
| 光源使用期限 | Up to 50,000 hours * Brightness mode dependent |
| 光输出 | Up to 2,600 ANSI Lumens |
| CLO（稳定光输出） | Yes |
| 对比度 | 1,800:1 Sequential 450:1 ANSI |
| 亮度均匀性 | >90% |
| 透镜范围 | (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation) (R9801832) - FLDX UST (0.41:1) - 90° Lens (R9802244) - EN67 (0.65:1) (R9802243) - EN66 (0.80 -1.21:1) (R9802003) - EN76 (0.95 -1.30:1) (R9802242) - EN63 (1.20 -1.70:1) * (R9802241) - EN61 (1.70 -2.50:1) * (R9801211) - EN44 (2.50 -4.60:1) * Standard Lens Option(s) |
| 光学镜片移动 | Up to 88% vertical lens shift & up to 38% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information Download Lens & Airflow Data Here |
| 挡光板 | Yes |
| 色彩纠正 | P7 RealColor™ |
| 色阶度 | REC.709 DCI (P3) via internal filter |
| 图像处理 | Embedded Warp & Blend Engine |
| WARP | 4-Corner Warp & Bow Correction via Warp Engine |
| 安装角度 | 360° Rotation |
| 网络连接 | 10/100 Ethernet via RJ45 connection |
| 集成网络服务器 | Yes |
| 诊断 | via Prospector web interface |
| HDR | HDR10 |
| 3D | Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details |
| 输入 | 1 x HDMI 2.0 (HDCP2.2) 1 x HDBaseT (HDCP1.4 - 9Gbps only) 2 x Dual Link DVI-D 2 x Display Port (1.2) 12G-SDI 1 x RJ45 Ethernet 1 x RS232 1 x Remote Control (RC) 3 x USB (2 x Rear, 1 x Front) DMX (1 x Input, 1 x Output) |
| 输入分辨率 | From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz or up to 2,560 x 1,600 @ 120Hz |
| 延迟 | TBD |
| 控制 | IR, RS232, IP, 12v Trigger Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them. Download our integration guide for more information. |
| 电力要求 | 100 - 240V / 50 - 60Hz |
| 功率消耗 | 570 W - Max |
| 每小时BTU | 1,945 BTU/h - Max |
| 噪音级别（典型，25°C/77°F时） | 30 - 33 dB(A) Max. |
| 工作温度 | 10 to 45 °C at Sea Level Optimal Set Point: 20 °C |
| 工作湿度 | 20 to 80% (relative humidity) |
| 气流要求 | Air Inlet (from Rear w/Feet Down): Right Side Exhaust (from Rear w/Feet Down): Rear Clearance Requirements: Front: 1cm Left: 1cm Right: 25cm Rear: 25cm Top: 1cm |
| 排风量 | 58 ft 3 /min @ 22.9 °C 99 m 3 /hour @ 22.9 °C Download Lens & Airflow Data Here |
| 尺寸(宽x长x高) | Excluding lens 450 x 482 x 255 mm 17.7 x 19 x 10 in. |
| 净重 | Excluding lens 21.5 kg / 47.4 lbs |
| 装运尺寸 | Excluding lens 464 x 679 x 773 mm 18.27 x 26.7 x 30.4 in |
| 毛重 | TBC |
| 标准配件 | Power Cord, Remote Control |
| 认证 | CE, FCC Class A and cCSAus |
| 保修期 | Limited 3 years parts and labor Extendable up to 5 years |
| 24/7 operation | This projector is designed and warranted for heavy duty 24/7 operation. Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications. |
| * | * Service required following 20,000 hours use Please contact an authorized Barco representative for details |
